MACX PL-EX-RPSSI-2I-SP - Repeater power supply - 2904960

Product properties

Product type	Repeater power supply
No. of channels	1
Type	Ex i signal conditioners with SIL and PL Functional Safety

Electrical properties

Electrical isolation between input and output	yes
Step response (10-90%)	1.3 ms (for jump 4 mA ... 20 mA, typical)
Maximum temperature coefficient	< 0.01 %/K
Maximum transmission error	< 0.1 % (of final value)
Transmission error, typical	< 0.05 % (of final value)
Electrical isolation Input/output/power supply
Rated insulation voltage	300 V_rms
Test voltage	2.5 kV AC (50 Hz, 60 s)
Overvoltage category	II
Degree of pollution	2
Insulation	Safe isolation in accordance with IEC/EN 61010-1
Electrical isolation Input/output
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Electrical isolation Input/power supply
Electrical isolation	375 V (Peak value in accordance with IEC/EN 60079-11)
Electrical isolation Output 1/output 2
Test voltage	1.5 kV AC (50 Hz, 60 s)
Supply
Designation	Repeater power supply operation
Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	< 75 mA (24 V DC / 20 mA)
Power dissipation	< 1.45 W (24 V DC/20 mA)
Supply
Designation	Signal conditioner operation
Nominal supply voltage range	19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current consumption	< 46 mA (24 V DC / 20 mA)
Power dissipation	< 1.2 W (24 V DC/20 mA)

Input data

Signal: Repeater power supply operation
Description of the input	Repeater power supply operation
Number of inputs	1
Current input signal	4 mA ... 20 mA
Transmitter supply voltage	> 16 V (20 mA)
	> 15.1 V (23 mA)
Signal: Signal conditioner operation
Description of the input	Signal conditioner operation
Current input signal	4 mA ... 20 mA
Voltage drop	approx. 3.9 V

Output data

Signal: Repeater power supply operation
Output description	Repeater power supply operation
Number of outputs	2
Current output signal	4 mA ... 20 mA (active)
Load/output load current output	< 450 Ω (20 mA)
Load/output load current output		< 380 Ω (23 mA)
Output ripple	< 20 mV_rms
Output behavior in the event of an error	0 mA (Cable break in the input)
Output behavior in the event of an error		≥ 23 mA (Cable short-circuit in the input)
Signal: Signal conditioner operation
Output description	Signal conditioner operation
Current output signal	4 mA ... 20 mA (active)
Load/output load current output	< 450 Ω (20 mA)
Load/output load current output		< 380 Ω (23 mA)
Output ripple	< 20 mV_rms
Output behavior in the event of an error	0 mA (Cable break in the input)
Output behavior in the event of an error		0 mA (Cable short-circuit in the input)

Connection data

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section AWG	24 ... 16

Ex data

Safety data
Note	Repeater power supply operation
Max. output voltage U_o	25.2 V
Max. output current I_o	93 mA
Max. output power P_o	587 mW
Safety-related maximum voltage U_m	253 V AC (125 V DC)
IIC: Max. external inductivity L_o / Max. external capacitance C_o	2 mH / 107 nF
IIB: Max. external inductivity L_o / Max. external capacitance C_o	4 mH / 820 nF
Safety data
Note	Signal conditioner operation
Input voltage U_i	≤ 30 V
Input current I_i	≤ 150 mA
Max. internal inductance L_i	negligible
Max. internal capacitance C_i	negligible

Interfaces

Data communication (bypass)
HART function	Yes
Protocols supported	HART

Signaling

Status display	Green LED (PWR supply voltage)

Dimensions

Width	12.5 mm
Height	99 mm
Depth	114.5 mm

Material specifications

Color	yellow (RAL 1018)
Flammability rating according to UL 94	V0 (Housing)
Housing material	PA 6.6-FR

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20 (not assessed by UL)
Ambient temperature (operation)	-20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

Approvals

CE
Certificate	CE-compliant
Note	and EN 61326
ATEX
Identification	 II (1) G [Ex ia Ga] IIC/IIB
		 II (1) D [Ex ia Da] IIIC
		 II 3 (1)G Ex nA [ia Ga] IIC/IIB T4 Gc
Certificate	BVS 10 ATEX E 143 X
IECEx
Identification	[Ex ia Ga] IIC/IIB
		[Ex ia Da] IIIC
		Ex nA [ia Ga] IIC/IIB T4 Gc
Certificate	IECEx BVS 10.0097X
UL, USA/Canada
Identification	UL 61010
Certificate	, C.D.-No 83104549
Shipbuilding approval
Identification	C, EMC2
Certificate	DNV GL 11 564-14HH
Safety Integrity Level (SIL, IEC 61508)
Identification	2
Performance Level (ISO 13849)
Identification	d

EMC data

Electromagnetic compatibility	Conformance with EMC directive
Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.

Mounting

Item number	2904960
Packing unit	1 pc
Note	Made to order (non-returnable)
Sales key	C430
Product key	DK1211
GTIN	4046356904520
Weight per piece (including packing)	197 g
Weight per piece (excluding packing)	197 g
Customs tariff number	85437090
Country of origin	DE

China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	No substance above 0.1 wt%

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MACX PL-EX-RPSSI-2I-SP - Repeater power supply

2904960

Product details

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MACX PL-EX-RPSSI-2I-SP - Repeater power supply 2904960

Product details

Compatible products

ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail bus connector 2695439

MACX MCR-PTB - Power and error message module 2865625

MACX MCR-PTB-SP - Power and error message module 2924184

TC-2D37SUB-ADIO32-2EX-P-UNI - Module carrier 2904684

GW HART USB MODEM - Cable adapter 1003824

UC-EMLP (11X9) - Plastic label 0819291

UC-EMLP (11X9) CUS - Plastic label 0824547

UC-EMLP (11X9) YE - Plastic label 0822602

UC-EMLP (11X9) YE CUS - Plastic label 0824548

UC-EMLP (11X9) SR - Plastic label 0828094

UC-EMLP (11X9) SR CUS - Plastic label 0828098

US-EMLP (11X9) - Plastic label 0828789

US-EMLP (11X9) YE - Plastic label 0828871

US-EMLP (11X9) SR - Plastic label 0828872

LS-EMLP (11X9) WH - Device marker 0831678

LS-EMLP (11X9) YE - Device marker 0831732

LS-EMLP (11X9) SR - Device marker 0831705

MPS-MT - Test plug 0201744

MPS-IH BK - Insulating sleeve 0201731

MPS-IH GY - Insulating sleeve 0201728

MPS-IH GN - Insulating sleeve 0201702

MPS-IH YE - Insulating sleeve 0201692

MPS-IH BU - Insulating sleeve 0201689

MPS-IH RD - Insulating sleeve 0201676

MPS-IH WH - Insulating sleeve 0201663

MACX PL-EX-RPSSI-2I-SP - Repeater power supply

2904960