AXL F PSAI8 I 1F
-
Safety module
1061424
Axioline F, Analog input module, Functional safety, PROFIsafe, Only for connection to Phoenix Contact or Siemens controllers in PROFINET systems, Safe analog inputs: 8 (1-channel assignment), 4 (2-channel assignment), 4 mA ... 20 mA, connection technology: 2-conductor (shielded, twisted pair), degree of protection: IP20; Extended temperature range.
Free download available.
Downloads
Product details
| Dimensional drawing |
|
| Width | 53.6 mm |
| Height | 126.1 mm |
| Depth | 54 mm |
| Note on dimensions | Housing dimensions |
| Note on application | |
| Note on application | Only for industrial use |
| Note on application | As things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA. |
| Mounting type | DIN rail mounting |
| Mounting position | any |
| Color (Housing) | yellow (RAL 1018) |
| Material | PBT |
| Flammability rating according to UL 94 | V-0 (Housing) |
| Programming data | |
| Input address area | 22 Byte (PROFIsafe 2.6.1) |
| Output address area | 5 Byte (PROFIsafe 2.6.1) |
| Fieldbus data telegram | |
| Required configuration data | 31 Byte |
| Analog: | |
| Input name | Safe analog inputs |
| Number of inputs | 8 (1-channel assignment) |
| 4 (2-channel assignment) | |
| Connection method | Push-in connection |
| Connection technology | 2-conductor (shielded, twisted pair) |
| A/D converter resolution | 16 bit |
| Limit frequency (3 dB) | 30 Hz |
| Wire-break behavior | Goes to 0 mA |
| Protective circuit | Transient protection of inputs; Suppressor diode |
| Overload protection; No; ±5.2 V DC, maximum, Imax = 50 mA | |
| Measured value representation | 16 bits |
| Data formats | Standardized representation |
| Current input signal | 4 mA ... 20 mA |
| Input resistance current input | typ. 104 Ω |
| Filtering | RFI filtering / passive TP 1st order |
| Input filter | 30 Hz |
| Product type | I/O component |
| Product family | Axioline F |
| Application | Functional safety |
| PROFIsafe | |
| Only for connection to Phoenix Contact or Siemens controllers in PROFINET systems | |
| Type | modular |
| Mounting position | any |
| Operating mode | PROFIsafe 2.6.1 |
| Special properties | Extended temperature range |
| The product is being prepared for compliance with the Cyber Resilience Act (CRA) | |
| Insulation characteristics | |
| Overvoltage category | II (IEC 60664-1) |
| Pollution degree | 2 (EN 60664-1) |
| Maximum power dissipation for nominal condition | 1.8 W |
| Potentials: Axioline F local bus supply (UBus) | |
| Supply voltage | 5 V DC (via bus base module) |
| Current draw | max. 110 mA (at UBus 5 V DC) |
| typ. 105 mA (at UBus 5 V DC) | |
| Potentials: I/O supply (UA) | |
| Supply voltage | 24 V DC (Power connector) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 31 mA |
| typ. 25.5 mA (Power supply from UA with 30 V DC) | |
| Protective circuit | Surge protection; electronic (35 V, 0.5 s) |
| Reverse polarity protection (parallel) | |
| Undervoltage detection; at 17 V | |
| Surge voltage detection; No | |
| Protection | max. 8 A (slow-blow, required externally) |
| Connection method | Push-in connection |
| Note on the connection method | Note the specification in the section Conductor cross-sections, and stripping and insertion lengths. |
| Conductor cross-section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -35 °C ... 60 °C |
| Degree of protection | IP20 |
| Degree of protection at installation location | min. IP54 |
| Note | Recommendation Do not use the AXL F PSAI8 I 1F in an atmosphere that contains corrosive gas. |
| Air pressure (operation) | 70 kPa ... 108 kPa |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Mechanical test | |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Air clearances and creepage distances | |
| Air clearances and creepage distances | IEC 60664-1 |
| Safety data: EN ISO 13849 | |
| Performance level (PL) | c (1-channel assignment) |
| e (2-channel assignment) | |
Your advantages
Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508
Safe analog value acquisition 4 ... 20 mA
8 safe inputs for 1-channel assignment
4 safe inputs for 2-channel assignment