Test disconnect terminal block - URTK/SP 0311126

Test disconnect terminal block, with slide, connection method: Screw connection, cross section: 0.5 mm2 - 10 mm2 , AWG: 20 - 10, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32, color: gray


Product Details




Number of connections 2
Number of levels 1
Potentials 1
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Mounting type NS 35/7,5
NS 35/15
NS 32
Screw thread M3

Color gray
Flammability rating according to UL 94 V0
Insulating material group I
Insulating material PA
Static insulating material application in cold -60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed

Grounding foot No
Number of connections per level 2
Nominal cross section 6 mm²
1 level
Designation Level 1 above 1 below 1
Connection labeling 1 level
Screw thread M4
Note Terminal point
Tightening torque 1.5 ... 1.8 Nm
Stripping length 11 mm
Connection in acc. with standard IEC 60947-7-1
Conductor cross section solid 0.5 mm² ... 10 mm²
Cross section AWG 20 ... 8
Conductor cross section flexible 0.5 mm² ... 6 mm²
Conductor cross section, flexible [AWG] 20 ... 10
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) 0.5 mm² ... 6 mm²
Flexible conductor cross section (ferrule with plastic sleeve) 0.5 mm² ... 6 mm²
2 conductors with same cross section, solid 0.5 mm² ... 2.5 mm²
2 conductors with same cross section, flexible 0.5 mm² ... 4 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve 0.5 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 4 mm²
Nominal current 41 A
Maximum load current 50 A (with 10 mm² conductor cross section)
Nominal voltage 500 V
Nominal cross section 6 mm²

Width 8.2 mm
Height NS 35/15 66.5 mm
Height NS 35/7,5 59 mm
Height 2.323 "
Height NS 32 64 mm
Length 99.5 mm

Mechanical data
Open side panel No

Rated surge voltage 6 kV
Maximum power dissipation for nominal condition 1.31 W

Connection in acc. with standard IEC 60947-7-1

Mechanical strength
Result Test passed
Attachment on the carrier
DIN rail/fixing support NS 32/NS 35
Test force setpoint 5 N
Result Test passed
Test for conductor damage and slackening
Rotation speed 10 rpm
Revolutions 135
Conductor cross section/weight 0.5 mm² / 0.3 kg
6 mm² / 1.4 kg
10 mm² / 2 kg
Result Test passed

Surge voltage test
Test voltage setpoint 7.3 kV
Result Test passed
Temperature-rise test
Requirement temperature-rise test Increase in temperature ≤ 45 K
Result Test passed
Short-time withstand current 6 mm² 0.72 kA
Short-time withstand current 10 mm² 1.2 kA
Result Test passed
Power-frequency withstand voltage
Test voltage setpoint 1.89 kV
Result Test passed

Needle-flame test
Time of exposure 30 s
Result Test passed
Ambient conditions
Ambient temperature (operation) -60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Permissible humidity (storage/transport) 30 % ... 70 %


Order Key 0311126
Packing unit 50 pc
Minimum order quantity 1 pc
Sales Key 010
Catalog Page Page 525 (C-1-2019)
GTIN 4017918001315
Weight per Piece (including packing) 38,2 GRM
Weight per Piece (excluding packing) 37,9 GRM
Customs tariff number 85369010
Country of origin TR



CSA

Approval Specification Data
Nominal voltage UN 300 V
Nominal current IN 45 A
AWG/kcmil 26-8
Min. cross section 26 mm²
Max. cross section 8 mm²

UL Recognized

Approval Specification Data
Nominal voltage UN 300 V
Nominal current IN 45 A
AWG/kcmil 26-8
Min. cross section 26 mm²
Max. cross section 8 mm²

KEMA-KEUR

Approval Specification Data
Nominal voltage UN 500 V
AWG/kcmil 26-8
Max. cross section 6 mm²

cUL Recognized

Approval Specification Data
Nominal voltage UN 300 V
Nominal current IN 45 A
AWG/kcmil 26-8
Min. cross section 26 mm²
Max. cross section 8 mm²

IECEE CB Scheme

Approval Specification Data
Nominal voltage UN 500 V
AWG/kcmil 26-8
Max. cross section 6 mm²

EAC

cULus Recognized


China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”


Compatible Products


  1. Insulating sleeve IS-K 10 - 1303337

  2. Screw bridge ISSBI 10- 8 - 0301534

    Max. current carrying capacity
    35 A
  3. Screw bridge FBI 2- 8 - 0200020

  4. Screw bridge FBI 4- 8 - 0200046

  5. Screw bridge FBI 3- 8 - 0200059

  6. Screw bridge FB 10- URTK/SP - 0311663

    Max. current carrying capacity
    50 A
  7. Screw bridge FBI 10- 8 - 0203263

    Max. current carrying capacity
    50 A
  8. Insertion bridge EB 2- 8 - 0202154

  9. Insertion bridge EB 3- 8 - 0202141

  10. Insertion bridge EB 10- 8 - 0202138

  11. Switching lock S-URTK/SP - 0311155

  12. Switching jumper SB 4-URTK/SP - 0360025

    Max. current carrying capacity
    35 A
  13. Switching jumper SB 2-URTK/SP - 0360012

    Max. current carrying capacity
    35 A
  14. Insertion bridge EB 4- 8 - 0202142

    Max. current carrying capacity
    41 A
  15. Insertion bridge EB 1/3/5/7-8 - 3072340

    Max. current carrying capacity
    41 A
  16. Insertion bridge EB 1/3/5-8 - 3072341

    Max. current carrying capacity
    41 A
  17. Short-circuit connector KSSI 4-8 - 3000735

  18. DIN rail NS 32 PERF 2000MM - 1201002

  19. Short-circuit connector KSSI 2-8 - 3000722

  20. DIN rail NS 32 UNPERF 2000MM - 1201015

  21. Partition plate ATP-URTK/SP - 0311139

  22. DIN rail NS 35/ 7,5 PERF 2000MM - 0801733

  23. DIN rail NS 35/ 7,5 UNPERF 2000MM - 0801681

  24. Screwdriver tools SZS 1,0X4,0 VDE - 1205066

  25. DIN rail NS 35/ 7,5 WH PERF 2000MM - 1204119

  26. Cover profile AP-ME METER - 3034361

  27. DIN rail NS 35/ 7,5 WH UNPERF 2000MM - 1204122

  28. Cover profile carrier APH-ME - 3034374

  29. DIN rail NS 35/ 7,5 AL UNPERF 2000MM - 0801704

  30. Cover profile carrier APT-ME - 3034358

  31. DIN rail NS 35/ 7,5 ZN PERF 2000MM - 1206421

  32. Cover profile AH-ME - 3240265

  33. DIN rail NS 35/ 7,5 ZN UNPERF 2000MM - 1206434

  34. Partition plate TS-UT 6-T/SP - 3072821

  35. DIN rail NS 35/ 7,5 CU UNPERF 2000MM - 0801762

  36. DIN rail NS 35/ 7,5 CAP - 1206560

  37. DIN rail NS 35/15 PERF 2000MM - 1201730

  38. DIN rail NS 35/15 UNPERF 2000MM - 1201714

  39. DIN rail NS 35/15 WH PERF 2000MM - 0806602

  40. DIN rail NS 35/15 WH UNPERF 2000MM - 1204135

  41. DIN rail NS 35/15 AL UNPERF 2000MM - 1201756

  42. DIN rail NS 35/15 ZN PERF 2000MM - 1206599

  43. DIN rail NS 35/15 ZN UNPERF 2000MM - 1206586

  44. DIN rail NS 35/15 CU UNPERF 2000MM - 1201895

  45. DIN rail NS 35/15 CAP - 1206573

  46. DIN rail NS 35/15-2,3 UNPERF 2000MM - 1201798

  47. Terminal marking ZB 8:UNBEDRUCKT - 1052002

  48. Labeled terminal marker ZB 8 CUS - 0825011

  49. Terminal marking UC-TM 8 - 0818072

  50. Labeled terminal marker UC-TM 8 CUS - 0824597

  51. Terminal marking UCT-TM 8 - 0828740

  52. Labeled terminal marker UCT-TM 8 CUS - 0829616

  53. Labeled terminal marker ZB 8,LGS:FORTL.ZAHLEN - 1052015

  54. Labeled terminal marker ZB 8,QR:FORTL.ZAHLEN - 1052028

  55. Labeled terminal marker ZB 8,LGS:L1-N,PE - 1052413

  56. End block CLIPFIX 35 - 3022218

  57. End block CLIPFIX 35-5 - 3022276

  58. End block E/NS 35 N - 0800886

  59. End block E/UK - 1201442

  60. End block E/UK 1 - 1201413


Your advantages

Touch-proof test sockets with 4 mm diameter are already permanently integrated
The terminal blocks can be fitted with fixed and switchable bridges on both sides