Replacement plug - VAL-MS-T1/T2 1000DCPV-UD-ST 2801231

Replacement plug for PV arrester combinations from the VAL-MS-T1/T2 1000DC-PV-... product range


Product Details




Ambient conditions
Vibration (operation) 7.5g (5-500 Hz/2.5 h/XYZ)
Ambient temperature (operation) -40 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Degree of protection IP20
Shock (operation) 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Permissible humidity (operation) 5 % ... 95 %
Altitude ≤ 2000 m (amsl (above mean sea level))

Standby power consumption PC ≤ 25 mVA
Impulse discharge current (10/350) µs, peak value limp 5 kA
Residual voltage Ures ≤ 1.8 kV (at In)
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 1.9 kV (at 20 kA)
≤ 2.2 kV (at 30 kA)
≤ 2.4 kV (at 40 kA)
Maximum discharge current Imax (8/20) µs 40 kA
Voltage protection level Up ≤ 1.8 kV
Impulse discharge current (10/350) µs, charge 2.5 As
Nominal discharge current In (8/20) µs 15 kA
Direction of action (L+)-PE & (L-)-PE & (L+)-(L-)
Response time tA ≤ 25 ns
Impulse discharge current (10/350) µs, specific energy 6.25 kJ/Ω
Protective circuit DC voltage side (DC)
Standby power consumption PC ≤ 25 mVA
Short-circuit current rating ISCPV 1000 A
Open circuit voltage UOCSTC ≤ 435 V DC
Continuous operating current ICPV < 20 µA
Nominal discharge current In (8/20) µs 15 kA
Impulse discharge current (10/350) µs, specific energy 6.25 kJ/Ω
Impulse discharge current (10/350) µs, peak value limp 5 kA
Residual voltage Ures ≤ 1.8 kV (at In)
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 1.9 kV (at 20 kA)
≤ 2.2 kV (at 30 kA)
≤ 2.4 kV (at 40 kA)
Maximum discharge current Imax (8/20) µs 40 kA
Voltage protection level Up ≤ 1.8 kV
Maximum continuous operating voltage UCPV 525 V DC
Insulation resistance Riso > 5 GΩ (at 500 V DC)
Impulse discharge current (10/350) µs, charge 2.5 As
Response time tA ≤ 25 ns

Indicator/remote signaling
Max. required back-up fuse not required

Dimensional drawing
Horizontal pitch 1 Div.
Height 52.4 mm
Width 17.5 mm
Depth 55.3 mm

CTI value of material 600
Color jet black RAL 9005
Housing material PA 6.6-FR
Insulating material PA 6.6-FR
Flammability rating according to UL 94 V-0
Material group I

Mounting type on base element

UL specifications
Power distribution system Single phase
Measured limiting voltage MLV (L+) - G 1900 V
Nominal voltage 875 V DC
Nominal discharge current In (L+) - G 20 kA
SPD Type 4CA
Mode of protection (L+) - G
Maximum continuous operating voltage MCOV (L+) - G 1050 V DC

Connection method pluggable

Standards/specifications EN 50539-11

SPD failure behavior OCM (Open-circuit mode)
Surge protection fault message optical
Number of positions 1
Type Male
Accessibility Accessible
Installation location Interior
Installation location of the disconnect device Internal
IEC test classification PV T1
PV T2
Insulation characteristics
Pollution degree 2
Overvoltage category III


Order Key 2801231
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key CL1
Catalog Page Page 59 (C-6-2015)
GTIN 4046356749220
Weight per Piece (including packing) 94,7 GRM
Weight per Piece (excluding packing) 94,7 GRM
Customs tariff number 85363030
Country of origin DE



KEMA-KEUR

EAC


China RoHS Environmentally Friendly Use Period = 50 years
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”