RIF-RPT-LDP-24DC/1X2/5X1/AU/FG - Relay module

1732886

Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode, and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 5 N/O contacts and 1 N/C contact, input voltage: 24 V DC

Product type	Relay Module
Product family	RIFLINE complete
Application	Forcibly guided contacts
Operating mode	100% operating factor
Mechanical service life	approx. 10⁷ cycles
B_10d	810000 Cycles (AC15, 250 V / 0.5 A, 1 NO)
	170000 Cycles (AC15; 250 V / 2 A; 1 NO)
	318000 Cycles (DC13, 24 V / 1 A, 1 NO)
	208000 Cycles (DC13, 24 V / 2 A, 1 NO)
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation	Basic insulation
	Safe isolation, reinforced insulation, and 6 kV between the coil and the contact circuit
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	18.09.2025

Maximum power dissipation for nominal condition	0.56 W
Test voltage (Winding/contact)	4 kV_rms (50 Hz, 1 min., winding/contact)
Test voltage (open contact)	1.5 kV_rms (50 Hz, 1 min., open contact)
Test voltage ()	2.5 kV_rms (50 Hz, 1 min, between contacts: 11-12 to 13-14)
Test voltage ()	4 kV_rms (50 Hz, 1 min., between contacts: all others)
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC (Input/output)
Rated surge voltage	6 kV (Input/output)
Short-circuit protection device
Current	6 A (RT28-32)
Voltage	250 V (SCPD)
Short-circuit current	1 kA (conditional short-circuit current)

Coil side
Nominal operating voltage U_N	24 V DC
Input voltage range in reference to U_N	See derating diagram
Drive and function	monostable
Drive (polarity)	polarized
Typical input current at U_N	21 mA
Input power dissipation for U_N	0.5 W
Typical response time	≤ 20 ms
Typical release time	≤ 20 ms
Coil voltage	24 V DC
Protective circuit	Freewheeling diode
Status display	LED (yellow)

Switching
Contact switching type	5 N/O contacts, 1 N/C contact
Type of switch contact	Single contact
Contact material	AgSnO, hard gold-plated
Maximum switching voltage	250 V AC
	30 V DC
Minimum switching voltage	10 V DC (5 mA)
Limiting continuous current	6 A
Maximum inrush current	35 A (20 ms)
Min. switching current	5 mA (10 V DC)
Interrupting rating (ohmic load) max.	144 W (24 V DC)
	180 W (30 V DC)
	1500 VA (250 V AC)
Force-guided contacts in accordance with EN 61810-3	Type A
Utilization category CB Scheme (IEC 60947-5-1)	AC15, 2 A/240 V (N/O contact)
	DC13, 2 A/24 V (N/O contact)

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross-section rigid	0.2 mm² ... 1.5 mm²
Conductor cross-section flexible	0.2 mm² ... 1.5 mm²
	0.2 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
	0.2 mm² ... 1.5 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross-section AWG	26 ... 16 (solid)
	24 ... 16 (flexible)

Item dimensions
Width	21 mm
Height	113 mm
Depth	70 mm

Flammability rating according to UL 94	V0 (Housing)

Ambient conditions
Degree of protection (Relay base)	IP20 (Relay base)
Degree of protection (Relay)	RT II (Relay)
Degree of protection (Installation location)	IP54 (Installation location)
Ambient temperature (operation)	-40 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Altitude	≤ 2000 m

CE
Identification	CE-compliant
UL, USA/Canada
Identification	UL/C-UL Listed UL 508

All specifications in accordance with the standard
Standards/regulations	IEC 60947-5-1
	IEC 61810-3
Air clearances and creepage distances between the power circuits
Standards/regulations	EN 61810-1

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Item number	1732886
Packing unit	10 pc
Minimum order quantity	10 pc
Sales key	DK6
Product key	DK652R
GTIN	4067923290846
Weight per piece (including packing)	87 g
Weight per piece (excluding packing)	87 g
Customs tariff number	85364110
Country of origin	CN

Compatible products

Accessories

ECLASS-13.0	27371601
ECLASS-15.0	27371601

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RIF-RPT-LDP-24DC/1X2/5X1/AU/FG - Relay module

1732886

Product details

ECLASS

ETIM

cULus Listed

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

RIF-RPT-LDP-24DC/1X2/5X1/AU/FG - Relay module 1732886

Product details

REL-SR- 24DC/5X1AU/1X2AU/FG - Safety relays 1779558

ECLASS

ETIM

Compatible products

REL-SR- 24DC/5X1AU/1X2AU/FG - Safety relays 1779558

RIF-RPT-LDP-24DC/1X2/5X1/AU/FG - Relay module

1732886