Relay connector, equipped with miniature switching relay, contacts (AgPd60): small loads, 1 N/C contact, input voltage 60 V AC/DC, with light indicator, can be plugged on basic termination blocks
Product details
Product type
Relay Module
Operating mode
100% operating factor
Mechanical service life
approx. 2x 107 cycles
Data management status
Date of last data management
19.03.2025
Maximum power dissipation for nominal condition
0.6 W
Test voltage (Winding/contact)
2.5 kV AC (50 Hz, 1 min., winding/contact)
Coil side
Nominal input voltage UN
60 V AC/DC
Input voltage range
48 V AC/DC ... 66 V AC/DC
Input voltage range in reference to UN
0.8 ... 1.1
Typical input current at UN
10 mA
Typical response time
7 ms (with DC)
Typical release time
11 ms (with DC)
Protective circuit
Bridge rectifier, varistor
Operating voltage display
yes
Switching
Contact switching type
Double contact, 1 N/C contact
Type of switch contact
Double contact
Contact material
AgPd60, hard gold-plated
Maximum switching voltage
30 V AC
36 V DC
Limiting continuous current
0.5 A
Maximum inrush current
0.2 A
Interrupting rating (ohmic load) max.
5 W (at 24 V DC)
Switching: when the gold layer is destroyed
Note
the following values are applicable if a gold layer is destroyed
