This LED machine light is designed to provide illumination inside or on machinery. You can use the light in harsh environments. This is possible thanks to the following properties: - High type of protection - Resistance to common cooling agents and lubricants - Resistance to vibrations and shock - 4 mm-thick safety glass The small diameter of just 40 mm enables mounting even where space is at a premium. Mounting is by means of holders or brackets (neither of which are supplied as standard) in which the light can swivel and the lighting can therefore be optimally aligned.
PLD M 260 W-40/80 540/D40
-
LED machine light
2702941
LED machine light, 24 V DC, emission angle (vertical/Horizontal): 40 °/80 °, length: 540 mm, diameter: 40 mm, degree of protection: IP67, can be swiveled, resistant to coolants and lubricants
This product needs further products for operation.
Mandatory accessories
Free download available.
Downloads
Product details
| Order information: | The PLD M-ME MC/D40 mounting holder (Item No. 2702491) or the PLD M-ME MB/D40 mounting bracket (Item No. 2702527) is required in order to mount the light. |
| Note on application | |
| Note on application | Only for industrial use |
| Product type | Machine light |
| Application | Machine tool |
| Mounting position | any |
| Special properties | can be swiveled with mounting accessories |
| resistant to coolants and lubricants |
| Supply: Module electronics | |
| Connection method | M12 connector, A-coded |
| Number of positions | 4 |
| Permissible conductor cross section | min. 0.34 mm² |
| Supply voltage | 24 V DC |
| Supply voltage range | 20 V DC ... 28 V DC |
| Current consumption | typ. 0.67 A (at 24 V DC) |
| Power consumption | approx. 16 W (at 24 V DC) |
| Protective circuit | Surge protection; Varistor and suppressor diode, 36 V DC |
| Reverse polarity protection; Polarity protection diode | |
| Connection method | M12 connector, A-coded |
| Light properties | |
| Source of light type | LED |
| Number of LEDs | 42 |
| Color temperature | 5000 K |
| Color rendering index | 80 |
| Luminous flux | approx. 1720 lm (Net luminous flux) |
| Luminous efficacy | approx. 108 lm/W |
| Illumination | max. 1270 lx (Distance of 1 m) |
| min. 285 lx (Distance of 1 m over 1 m² area) | |
| Average illumination | 746 lx (Distance of 1 m over 1 m² area) |
| Emission angle | 40 ° (C0-C180) |
| 80 ° (C90-C270) | |
| Ordinance | Delegated Regulation (EU) 2019/2015 |
| Energy efficiency class | C (2 light sources) |
| E (1 light source) | |
| Note | This product contains energy efficiency class C light sources. |
| This product contains an energy efficiency class E light source. | |
| Dimensional drawing |
|
| Width | 40 mm |
| Height | 30 mm |
| Length | 540 mm |
| Diameter | 40 mm |
| Note on dimensions | Length without M12 flush-type connector |
| Color | aluminum color |
| Material () | Anodized aluminum (Light housing) |
| Single-pane safety glass (ESG, thermally toughened float glass) (Pane) |
| Ambient conditions | |
| Ambient temperature (operation) | 0 °C ... 50 °C |
| Degree of protection | IP67 |
| Air pressure (operation) | 69 kPa ... 102 kPa |
| Air pressure (storage/transport) | 69 kPa ... 102 kPa |
| Ambient temperature (storage/transport) | -20 °C ... 75 °C |
| Permissible humidity (operation) | 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 95 % (non-condensing) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | Screw mounting |
| Assembly note | Mounting with mounting holders or mounting brackets, please observe the notes in the package slip. |
| Mounting position | any |
cETL
Approval ID: LuminairesEAC
Approval ID: TR_TS_D_12879-22cETLus
Your advantages
Space saving, thanks to the small diameter
Plug-in supply line enables free choice of the cable length as well as quick and easy installation
Focused illumination, thanks to swivel action
IP67 protection and resistance to cooling agents and lubricants enables use in machine tools
Can be used at high temperatures and can be subjected to strong vibrations and shocks
Safety glass enables use even in environments with potential mechanical strain
ETL approval permits use on the North American market
Particularly economical thanks to energy-efficient LED technology and an LED service life of at least 60000 h