Safety-related digital output module, IP20 protection, for the SafetyBridge system. The module has four safe digital outputs with two-channel occupancy or 8 safe digital outputs with single-channel occupancy
The safety module is an output module from the Axioline F product range with integrated safety logic designed for use in a SafetyBridge Technology V3 system. The safety module can be used as part of an Axioline F station at any point within an EtherCAT®, EtherNet/IP™, Sercos, Modbus, PROFINET or PROFIBUS system. The module has four safe digital outputs for two-channel assignment or eight safe digital outputs for single-channel assignment.
| Transmission medium | Copper |
| Potentials | |
| Protective circuit | Protection against polarity reversal, EMC protective circuit, undervoltage detection |
| Potentials: Supply for digital output modules (UO) | |
| Current draw | typ. 25 mA (all outputs set; power supply by UO with 30.2 V DC; without power supply to the actuator) |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30.2 V DC (including all tolerances, including ripple) |
| Potentials: Axioline F local bus supply (UBus) | |
| Current draw | max. 280 mA |
| typ. 260 mA (all outputs set; power supply by UO of 19.2 V DC to 30.2 V DC) | |
| Supply voltage | 5 V DC (via bus base module) |
| Dimensional drawing |
|
| Note on dimensions | Housing dimensions |
| Height | 126.1 mm |
| Width | 53.6 mm |
| Depth | 54 mm |
| Digital | |
| Maximum output current per channel | 2 A |
| Behavior with overload | Affected output is disabled and a diagnostic message is generated. |
| Maximum output current per module / terminal block | 8 A |
| Output name | Digital outputs |
| Output voltage | 24 V DC |
| Number of outputs | 4 (with two-channel assignment) |
| 8 (for single-channel assignment) | |
| 8 | |
| Protective circuit | Overload protection, freewheeling circuit for inductive loads,Discharge circuit for accelerated discharge of capacitive loads |
| Output current | max. 2 A (per channel) |
| max. 1.5 A (per channel according to CULUS) | |
| max. 4 A (per group) | |
| max. 3 A (per group according to CULUS) | |
| max. 8 A (Total current of all outputs; Please observe the notes in the user manual.) | |
| max. 6 A (Total current of all outputs according to CULUS) | |
| Housing color | yellow |
| Mounting type | DIN rail |
| Axioline F local bus | |
| Connection method | Bus base module |
| Safety data: EN 62061 | |
| Safety Integrity Level Claim Limit (SIL CL) | max. 3 (two channel; dependent in parameterization and wiring) |
| Safety data: EN ISO 13849 | |
| Category | max. 4 (two channel; dependent in parameterization and wiring) |
| Performance level (PL) | max. e (two channel; dependent in parameterization and wiring) |
| Safety data: IEC 61508 - High demand | |
| SIL_GRP | max. 3 (two channel; dependent in parameterization and wiring) |
| Safety data: IEC 61508 - Low demand | |
| Safety Integrity Level (SIL) | max. 3 (two channel; dependent in parameterization and wiring) |
| SafetyBridge properties | |
| Logic memory | 30 kByte |
| Connection to I/O modules | max. 16 (safe digital I/O modules) |
| Air pressure (operation) | 70 kPa ... 108 kPa (up to 3000 m above sea level) |
| Ambient temperature (operation) | -35 °C ... 60 °C (Mounting position: any) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Degree of protection | IP20 |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (up to 3500 m above sea level) |
| Permissible humidity (storage/transport) | 10 % ... 75 % (non-condensing) |
| Permissible humidity (operation) | 10 % ... 75 % (on average, 85% infrequently, non-condensing) |
| Connection technology | |
| Connection name | Axioline F connector |
| Axioline F connector | |
| Conductor cross section AWG | 24 ... 16 |
| Conductor cross section, flexible | 0.2 mm2 ... 1.5 mm2 |
| Connection method | Spring-cage connection |
| Conductor cross section, rigid | 0.2 mm2 ... 1.5 mm2 |
| Conductor connection | |
| Conductor cross section AWG | 24 ... 16 |
| Conductor cross section solid | 0.2 mm2 ... 1.5 mm2 |
| Connection method | Spring-cage connection |
| Conductor cross section flexible | 0.2 mm2 ... 1.5 mm2 |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Type | modular |
| Axioline | |
| Application | SafetyBridge technology |