Ground terminal block - UDK 3-PE
2775456

1-level ground modular terminal block with double connection on both sides, cross section: 0.2 - 2.5 mm2, width: 5.2 mm, color: green-yellow


Product Details




Number of connections 4
Number of rows 1
Insulation characteristics
Overvoltage category III
Degree of pollution 3

Rated surge voltage 6 kV

Grounding foot Yes
Number of connections per level 2
Nominal cross section 2.5 mm²
1 level
Designation Level 1 above 1+2 below 1+2
Connection labeling 1 level
Screw thread M3
Note Please observe the current carrying capacity of the DIN rails.
Tightening torque 0.5 ... 0.6 Nm
Stripping length 8 mm
Internal cylindrical gage A3
Connection in acc. with standard IEC 60947-7-2
Conductor cross section solid 0.2 mm² ... 4 mm²
Cross section AWG 24 ... 12
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section, flexible [AWG] 24 ... 14
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) 0.25 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve) 0.25 mm² ... 1.5 mm²

Width 5.2 mm
Height NS 35/15 54.5 mm
Height NS 35/7,5 47 mm
Height 1.85 "
Height NS 32 52 mm
Length 63.5 mm

Color green-yellow
Flammability rating according to UL 94 V2
Insulating material group I
Insulating material PA
Static insulating material application in cold -40 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Relative insulation material temperature index (Elec., UL 746 B) 125 °C

General
Terminal block mounting 0.5 Nm ... 0.6 Nm (PE foot with mounting screw, M2.5)
Mechanical data
Open side panel No

Oscillation/broadband noise
Specification DIN EN 50155 (VDE 0115-200):2018-05
Spectrum Service life test category 2, bogie-mounted
Frequency f1 = 5 Hz to f2 = 250 Hz
ASD level 6.12 (m/s²)²/Hz
Acceleration 3.12g
Test duration per axis 5 h
Test directions X-, Y- and Z-axis
Shocks
Pulse shape Half-sine
Acceleration 30g
Shock duration 18 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Ambient conditions
Ambient temperature (operation) -60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Permissible humidity (storage/transport) 30 % ... 70 %

Connection in acc. with standard IEC 60947-7-2

Mounting type NS 35/7,5
NS 35/15
NS 32
Terminal block mounting 0.5 Nm ... 0.6 Nm (PE foot with mounting screw, M2.5)


Order Key 2775456
Packing unit 50 pc
Minimum order quantity 1 pc
Sales Key 012
Catalog Page Page 471 (C-1-2019)
GTIN 4017918068585
Weight per Piece (including packing) 24,4 GRM
Weight per Piece (excluding packing) 24,4 GRM
Customs tariff number 85369010
Country of origin PL



UL Recognized

Approval Specification Data
AWG/kcmil 30-12
Min. cross section 30 mm²
Max. cross section 12 mm²

cUL Recognized

Approval Specification Data
AWG/kcmil 30-12
Min. cross section 30 mm²
Max. cross section 12 mm²

EAC

EAC

cULus Recognized


China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”


Your advantages

Two connection points on each side to accommodate several conductors
Double bridge shaft enables individual potential distribution and supply