The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product type
Contact insert
Application
Signal
Number of positions
8
Seal present
yes
Shielded
yes
Coding
A
Thread type
M12
Insulation characteristics
Overvoltage category
III
Degree of pollution
3
Rated surge voltage
0.8 kV
Contact resistance
≤ 3 mΩ
Insulation resistance
≥ 100 MΩ
Nominal voltage UN
30 V
Nominal current IN
2 A
Connection method
Wave soldering
Material Contact carrier
PA 6.6
Material Contact
CuZn
Material Contact surface
Au
Material Seal
FKM / EPDM
Flammability rating according to UL 94
V0
Connection 1
Head design
Pin
Head cable outlet
angled
Head thread type
M12
Head locking type
SPEEDCON
Coding
A
Mechanical data
Insertion/withdrawal cycles
> 100
Ambient conditions
Degree of protection
IP67
Ambient temperature (operation) (male connector/female connector)
Reduced mounting costs thanks to two-piece device connector
All common pin assignments and codings available
Easy device integration thanks to mechanical port screw connections with threaded attachment, press-in contour or direct integration in the front plate
Additional gasket for the device when not plugged in