Migration board for converting TDC3000 to modern control platforms, digital input, 32 channel, SSR
| Product type | Interface module |
| Insulation characteristics | |
| Overvoltage category | II |
| Pollution degree | 2 |
| Supported controller HONEYWELL TDC3000 | |
| Suitable I/O card | TDID12 |
| Nominal input voltage UN | 24 V DC |
| Input voltage range | 10 V DC ... 32 V DC |
| Typical input current at UN | 20 mA |
| Switching | |
| Maximum switching voltage | 30 V DC |
| Limiting continuous current | 50 mA |
| Error detection (line break / short-circuit) | no |
| Controller level | |
| Connection method | D-SUB 37 female connector |
| Number of connections | 2 |
| Number of positions | 37 |
| Field level | |
| Connection method | pluggable |
| Status display present | yes |
| Dimensional drawing |
|
| Width | 462.3 mm |
| Height | 120.7 mm |
| Depth | 72.45 mm |
| Ambient conditions | |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 75 °C |
| Altitude | < 2000 m |
| Permissible humidity (operation) | < 90 % |
| Mounting type | TDC3000 chassis |
| Mounting position | any |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| Output | 0.05 A | |||
| Input | 0.025 A |
| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| Output | 0.05 A | |||
| Input | 0.025 A |
