Pressure switch with display, G1/4 I process connection, IO-Link communication
The pressure sensor detects the operating pressure of liquid or gas media in a range from -1 to 10 bar. The overload-proof ceramic measuring cell is designed for in excess of 100 million cycles and enables a high switching point accuracy. The pressure switch offers the option of using the set switching points via two switching outputs or reading all process data via the IO-Link interface.
| Product type | Sensor |
| Diagnostics messages | Short circuit output OUT1 Output OUT2 |
| Faulty measuring cell Output OUT2 |
| Measuring range_pressure | -1 bar ... 10 bar (Minimum burst pressure 150 bar) |
| Supply: Module electronics | |
| Connection technology | 4-conductor |
| Connection method | M12 connector |
| Number of positions | 4 |
| Supply voltage range | 18 V DC ... 36 V DC |
| Current consumption | < 35 mA |
| Protective circuit | Polarity protection, surge protection; Surge protection up to 40 V |
| IO-Link | |
| Number of ports | 1 |
| Connection method | M12 connector |
| Port type | Class A |
| Specification | V1.1 |
| Cycle Time | min. 2.3 ms |
| Amount of process data | 1 Byte (Analog) |
| 2 Byte (Binary) | |
| Analog: | |
| Protective circuit | Short-circuit protection, polarity reversal protection |
| Digital: | |
| Output name | Digital outputs |
| Output description | Extended diagnostics, parameterizable outputs |
| Connection method | M12 connectors, assigned four times |
| Connection technology | 4-conductor |
| Number of outputs | 2 (OUT1 = switching output, OUT2 = switching output or diagnostic output) |
| Protective circuit | Short-circuit protection; Clocked |
| Delay time | 0.3 s (Operational readiness) |
| Maximum operating frequency with ohmic nominal load | ≤ 170 Hz |
| Switching frequency | min. 100000000 |
| Connection method | M12 connector |
| Designation connection point | Copper cable |
| Number of positions | 4 |
| Diagnostic messages | |
| Diagnostics | Short circuit output OUT1 |
| Message | Output OUT2 |
| Diagnostic messages | |
| Diagnostics | Faulty measuring cell |
| Message | Output OUT2 |
| Dimensional drawing |
|
| Width | 34 mm |
| Height | 91.5 mm |
| Depth | 48 mm |
| Color | jet black RAL 9005 |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 80 °C |
| -25 °C ... 80 °C (Medium temperature) | |
| Air pressure (operation) | -1 bar ... 10 bar (Minimum burst pressure 150 bar) |
| Ambient temperature (storage/transport) | -40 °C ... 100 °C |
| Permissible humidity (operation) | 0 % ... 90 % |
| Protection class | III |
