Circular connectors (device side) - SACC-DSI-M8MS-4CON-L90 SH 1456048

Sensor/actuator flush-type connector, connector, 4-pos. M8, rear/screw mounting with M8 fastening thread, with angled solder connection


Product Details




Number of positions 4
Coding A - standard
Insulation characteristics
Overvoltage category II
Degree of pollution 3

Degree of protection IP67
Degree of protection IP67
Ambient temperature (operation) -40 °C ... 85 °C
-25 °C ... 85 °C

Header 1
Type Flush-type plug, angled

Rated surge voltage 1.5 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 48 V AC
60 V DC
Nominal current IN 4 A

Flammability rating according to UL 94 HB
Sealing material NBR
Contact material Cu alloy
Contact surface material Au
Contact carrier material PA 6.6
Cable gland material Zinc die-cast, nickel-plated

Connection technology
Connection method Solder pins
Conductor connection
Connection method Solder pins

Mounting type Rear mounting M8 x 1 With flat nut
Assembly instructions With flat nut

Standards/specifications IEC 61076-2-104


Order Key 1456048
Packing unit 20 pc
Minimum order quantity 1 pc
Sales Key 021
Catalog Page Page 228 (C-2-2013)
GTIN 4046356605915
Weight per Piece (including packing) 6,5 GRM
Weight per Piece (excluding packing) 6,4 GRM
Customs tariff number 85366990
Country of origin DE



UL Recognized

Approval Specification Data
Nominal voltage UN 30 V
Nominal current IN 4 A
AWG/kcmil 24
Max. cross section 24 mm²

cUL Recognized

Approval Specification Data
Nominal voltage UN 30 V
Nominal current IN 4 A
AWG/kcmil 24
Max. cross section 24 mm²

EAC

cULus Recognized


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 25;
China RoHS For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”


Your advantages

Easy PCB assembly: one-piece connectors for wave soldering
Standard pin assignments and codings for signal transmission with a uniform design-in design
For high transmission reliability: optional shield connection to the housing and latching on the PCB