1. Home
  2. Products
  3. Connectors and cables
  4. Circular connectors
  5. Device connector, rear mounting - SACC-DSI-M12MS-12P-M16XL/0,5
M12 flush-type plug
Pin assignment M12 male connector, 12-pos., male side view
Contact assignment of the M12 plug

Device connector, rear mounting - SACC-DSI-M12MS-12P-M16XL/0,5
1411596

Device connector, rear mounting, Universal, 12-position, Plug, M12, A-coded, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.14 mm2, TPE litz wire

Product Details

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Product type Circular connectors (device side)
Number of positions 12
No. of cable outlets 1
Shielded no
Coding A - standard
Insulation characteristics
Overvoltage category II
Degree of pollution 3
Degree of protection IP67
Degree of protection IP65/IP67
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)
Insertion/withdrawal cycles > 100
Header 1
Head design Plug
Head thread type M12
Coding A-coded
Rated surge voltage 0.8 kV
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Nominal voltage UN 30 V
Nominal current IN 1.5 A
Flammability rating according to UL 94 V0
Sealing material FKM
Contact material CuZn
Contact surface material Au
Contact carrier material PA 6.6
Cable gland material Zinc die-cast, nickel-plated
Connection technology
Connection method Individual wires
Conductor connection
Connection method Individual wires
Mounting type Rear mounting
Assembly instructions Tightening limitation
M12
Standards/specifications IEC 61076-2-101
Cable length 0.5 m
Cable structure
Cable type TPE litz wire
Signal type/category Universal
Conductor material Tin-plated Cu litz wires
Conductor structure signal line 7x 0.16 mm
AWG signal line 26
Material wire insulation TPE
Thickness, insulation 0.21 mm (Core insulation)
Wire diameter incl. insulation 1.1 mm ±0.05 mm
Single wire, color Brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink, red/blue
Electrical properties
Nominal voltage, cable 300 V
Test voltage, cable 2000 V AC
Conductor resistance ≤ 57.6 mΩ/m
Cable insulation resistance ≥ 20 MΩ*km
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)
Item number 1411596
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key ABQ
Product Key ABQCDG
Catalog Page Page 50 (C-2-2019)
GTIN 4046356935852
Weight per Piece (including packing) 32,7 g
Weight per Piece (excluding packing) 22,22 g
Customs tariff number 85366990
Country of origin DE

ECLASS

ECLASS-9.0 27440102
ECLASS-10.0.1 27440102
ECLASS-11.0 27440102

ETIM

ETIM 8.0 EC002635

UNSPSC

UNSPSC 21.0

EAC

Approval ID: B.01687

cULus Recognized

Approval ID: E221474-20140616
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
30 V 1.5 A - 26
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

Easy-to-install, optimized XL housing contour with wrench size 19
Mechanical tightening limitation for long-term-stable gasket
Pre-assembled with litz wires for immediate use
Customer-specific assemblies and litz wire lengths available
Sealed on the litz wire side for optimum leak-tightness
All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design
For high transmission safety: shield connection to the housing with optional EMC nut