Sensor/actuator flush-type socket, 8-pos., M12 SPEEDCON, rear/screw mounting with Pg9 thread, with straight solder connection
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Product type | Circular connectors (device side) |
| Number of positions | 8 |
| Shielded | no |
| Coding | A - standard |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Degree of protection | IP67 (When plugged in) |
| IP65 (When plugged in) | |
| Degree of protection | IP65/IP67 |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| -25 °C ... 85 °C (Cable, flexible installation) | |
| -40 °C ... 85 °C (cable, fixed installation) |
| Dimensional drawing |
|
| Length of the solder pin | 12 mm |
| 12 mm |
| Insertion/withdrawal cycles | > 100 |
| Header 1 | |
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | A-coded |
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 30 V |
| Nominal current IN | 2 A |
| Test voltage | 0.8 kV |
| Flammability rating according to UL 94 | V0 |
| Sealing material | FKM |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Cable gland material | Zinc die-cast, nickel-plated |
| Connection technology | |
| Connection method | Solder pins |
| Conductor connection | |
| Connection method | Solder pins |
| Mounting type | Rear mounting Pg9 With flat nut |
| Assembly instructions | With flat nut |
| M12 | |
| Standards/specifications | IEC 61076-2-101 |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Cable, flexible installation) |
| -40 °C ... 85 °C (cable, fixed installation) | |
| Nominal Voltage UN | Nominal Current IN | Cross Section AWG | Cross Section mm2 | |
|---|---|---|---|---|
| 30 V | 2 A | - 24 |
| Nominal Voltage UN | Nominal Current IN | Cross Section AWG | Cross Section mm2 | |
|---|---|---|---|---|
| 30 V | 2 A | 24 - 22 |