MACX MCR-VDC - Voltage measuring transducers

2906242

MACX MCR voltage transducers for DC voltages of 0... (+/-) 20 V DC to 0.. .(+/-) 660 V DC, output signal (+/-) 10 V/ (+/-)20 mA

Where Can I Buy This Item?

Product details

Product type	Voltage transducer
Insulation characteristics
Pollution degree	2

Alignment span	± 20 %
Alignment zero	± 20 %
Electrical isolation	IEC 61010-2-30 (Measuring category II (1000 V)Measuring category III (600 V)Measuring category IV (300 V))
	IEC 61010-1 (Overvoltage category III at 300 VOvervoltage category IV at 150 V)
Test voltage	5.3 kV AC (50 Hz, 60 s)
	2.2 kV AC (50 Hz, 60 s)
Maximum power dissipation for nominal condition	1.2 W
Protective circuit	Surge protection; 33 V suppressor diode
Step response (10-90%)	< 16 ms
Maximum temperature coefficient	< 0.015 %/K
Maximum transmission error	< 1 % (of measuring range end value)
Supply
Nominal supply voltage	24 V DC (-20 % ... +25 %)
Supply voltage range	19.2 V DC ... 30 V DC
Max. current consumption	< 60 mA

Measurement
Configurable/programmable	Yes
Input voltage range	-550 V DC ... 550 V DC
Input resistance of voltage input	5500 kΩ
Maximum input voltage	± 660 V DC
Impulse form	DC voltage
Measurement
Input voltage range	-370 V DC ... 370 V DC
Input resistance of voltage input	3700 kΩ
Measurement
Input voltage range	-250 V DC ... 250 V DC
Input resistance of voltage input	2500 kΩ
Measurement
Input voltage range	-170 V DC ... 170 V DC
Input resistance of voltage input	1700 kΩ
Measurement
Input voltage range	-120 V DC ... 120 V DC
Input resistance of voltage input	1200 kΩ
Measurement
Input voltage range	-80 V DC ... 80 V DC
Input resistance of voltage input	800 kΩ
Measurement
Input voltage range	-54 V DC ... 54 V DC
Input resistance of voltage input	800 kΩ
Measurement
Input voltage range	-36 V DC ... 36 V DC
Input resistance of voltage input	800 kΩ
Measurement
Input voltage range	-24 V DC ... 24 V DC
Input resistance of voltage input	240 kΩ

Signal: Voltage
Voltage output signal	-10 V ... 10 V
Max. voltage output signal	≤ 11 V
Load/output load voltage output	> 10 kΩ
Ripple	50 mV
Signal: Current
Current output signal	-20 mA ... 20 mA
Max. current output signal	≤ 22 mA
Load/output load current output	< 500 Ω
Max. capacitive load	< 1000 pF
Max. inductive load	< 1 mH

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14

Width	22.5 mm
Height	113 mm
Depth	114 mm

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 60 °C
Ambient temperature (storage/transport)	-40 °C ... 85 °C (non-condensing)
Altitude	≤ 2000 m
Permissible humidity (operation)	10 % ... 95 % (non-condensing)

CE
Certificate	CE-compliant
UKCA
Certificate	UKCA-compliant
UL, USA/Canada
Identification	UL 61010 Listed

Low Voltage Directive	Conformance with Low Voltage Directive
Noise immunity	EN 61000-6-2
Note	When being exposed to interference, there may be minimal deviations.
Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4

Standards/regulations	IEC 61010-1
	IEC 61010-2-030

Mounting type	DIN rail mounting
Assembly instructions	Can be aligned with spacing = 10 mm
Mounting position	any

Commercial data

Item number	2906242
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	C445
Product key	CK4B21
Catalog page	Page 238 (C-5-2019)
GTIN	4055626050928
Weight per piece (including packing)	231.2 g
Weight per piece (excluding packing)	211.7 g
Customs tariff number	85437090
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Your advantages

Adjustable voltage ranges

Bidirectional output signals

3-way isolation

ZERO/SPAN adjustment ±20%

Tool-free parameterization of measured values

Teach-in configuration of the measured value range

ECLASS-11.0	27210125
ECLASS-13.0	27210125
ECLASS-12.0	27210125


REACh SVHC	Lead 7439-92-1

China RoHS	Environmentally Friendly Use Period = 50 years
		For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MACX MCR-VDC - Voltage measuring transducers

2906242

Product details

ECLASS

ETIM

UNSPSC

EAC

UL Listed

cUL Listed

cULus Listed

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

MACX MCR-VDC - Voltage measuring transducers 2906242

Product details

ECLASS

ETIM

UNSPSC

Your advantages

MACX MCR-VDC - Voltage measuring transducers

2906242