UNO-UPS/24DC/24DC/60W - Uninterruptible power supply

2905907

Uninterruptible energy supply with integrated energy storage, lead AGM, VRLA technology, 24 V DC, 0.8 Ah.

Where Can I Buy This Item?

Product details

Product description

DC operation
Input voltage	24 V DC
Input voltage range	22.5 V DC ... 29.5 V DC
Voltage type of supply voltage	DC
Buffer period	45 min. (0.5 A)
	20 min. (1 A)
	8 min. (2 A)
	5 min. (2.5 A)
Current consumption	2.8 A (max.)
	< 60 mA
	< 300 mA
Input fuse	5 A (electronic)

Efficiency	> 95 % (Mains operation, with charged energy storage)
	> 92 % (Battery operation)
Nominal output voltage	24 V DC
Nominal output current (I_N)	2.5 A
Bridging time	300 s
Output power	60 W
Power dissipation	3 W (Mains operation)
	6 W (Battery operation)
	Battery operation
Connection in series	No
Mains operation
Nominal output voltage	24 V DC
Output voltage range	U_Out = U_In - 0.5 V DC
Nominal output current (I_N)	2.5 A
Battery operation
Nominal output voltage	24 V DC
Output voltage range	20 V DC ... 27.3 V DC
Nominal output current (I_N)	2.5 A
Signal: Alarm
Output description	Transistor (24 V DC/15 mA)
Signal: Battery mode
Output description	Transistor (24 V DC/15 mA)

Charging current	200 mA
Nominal capacity	2x 0.8 Ah
Charging time	approx. 5 h
Battery module service life	3 Years ... 5 Years (20 °C)
Latest startup date (battery only)	3 Months (0 °C ... 20 °C)
	1 Months (30 °C ... 40 °C)
Latest startup (battery only) - range	3 Months ... 1 Months (20 °C ... 30 °C)
Battery technology	VRLA-AGM
Memory medium	Lead rechargeable battery module
Accumulator type	YUASA NP0.8-12
	YUCEL Y0.8-12
	YUVOLT 0.8-12
Battery presence check (cyclic)	60 s
Battery fuse	T 5 A 32 V
IQ technology	no

Input
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	7 mm
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	7 mm
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	7 mm
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Types of signaling	LED
Signal output
Signalization designation	Power In OK
Status display	LED
Note on status display	Static to
Signal output: Switching output
Signalization designation	Alarm
Status display	LED
Note on status display	Static to
Signal output
Status display	LED
Note on status display	flashing
Signal output: Switching output
Signalization designation	Battery mode
Status display	LED
Note on status display	flashing
Signal output
Signalization designation	Service
Status display	LED
Note on status display	flashing

Product type	DC UPS with integrated energy storage
Product family	UNO UPS ‒ UPS with integrated energy storage
IQ technology	no
MTBF (IEC 61709, SN 29500)	> 1900000 h (40 °C)
Insulation characteristics
Protection class	III
Degree of pollution	2
Life expectancy (electrolytic capacitors)
Time	170312 h

Width	110 mm
Height	90 mm
Depth	84 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm (≤ 70 °C)
Installation distance top/bottom	30 mm / 30 mm (≤ 70 °C)

Mounting type	DIN rail: 35 mm
Assembly instructions	alignable: 0 mm horizontally, 30 mm vertically
Mounting position	horizontal DIN rail NS 35, EN 60715

Housing material	Plastic
Type of housing	Plastic
Foot latch material	POM (Polyoxymethylene)
Housing material	PC+ABS

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-15 °C ... 50 °C
Ambient temperature (storage/transport)	-20 °C ... 60 °C
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 13.2 Hz, amplitude ±1.0 mm (according to IEC 60068-2-6)
	13.2 Hz ... 100 Hz, 0.7g

Standard - Electrical safety	IEC 62368-1 (SELV)

UL approvals	UL Listed UL 508
	UL/C-UL Recognized UL 60950-1

EMC requirements for noise emission	EN 61000-6-3
	EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
	EN 61000-6-2
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 3 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Signal	2 kV (Test Level 4 - asymmetrical)
Comments	Criterion A
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 3 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 3 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion A
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Emitted interference
Emitted radio interference in acc. with EN 55011	EN 55011 (EN 55022) Class B, area of application: Industry and residential
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Commercial data

Item number	2905907
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CM27
Product key	CMUUV3
Catalog page	Page 349 (C-4-2019)
GTIN	4055626007380
Weight per piece (including packing)	1,182 g
Weight per piece (excluding packing)	1,182 g
Customs tariff number	85371091
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

Accessories

Your advantages

Compact and narrow

ECLASS-11.0	27040705
ECLASS-13.0	27040705
ECLASS-12.0	27040705


REACh SVHC	Lead 7439-92-1

China RoHS	Environmentally Friendly Use Period = 25;
		For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UNO-UPS/24DC/24DC/60W - Uninterruptible power supply

2905907

Product details

ECLASS

ETIM

UNSPSC

cUL Recognized

UL Recognized

IECEE CB Scheme

EAC

EAC

KC

cULus Listed

cULus Recognized

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

UNO-UPS/24DC/24DC/60W - Uninterruptible power supply 2905907

Product details

ECLASS

ETIM

UNSPSC

Compatible products

UNO-PS/1AC/24DC/ 60W - Power supply unit 2902992

UNO-PS/1AC/24DC/100W - Power supply unit 2902993

FUSE 5A/32V FK-1 - Fuse 2908367

Your advantages

UNO-UPS/24DC/24DC/60W - Uninterruptible power supply

2905907