TRIO-UPS/1AC/24DC/ 5 - Uninterruptible power supply - 2866611

Input data

DC operation
Input voltage	24 V DC
Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	85 V AC ... 264 V AC (Derating < 90 V AC: 2.5%V)
Input voltage range		100 V DC ... 350 V DC (UL508: 100 ... 250 V)
Input voltage range AC	85 V AC ... 264 V AC (Derating < 90 V AC: 2.5%V)
Input voltage range DC	100 V DC ... 350 V DC (UL508: 100 ... 250 V)
Voltage type of supply voltage	AC/DC
Inrush current	< 44 A (< 1.3 A²s)
Inrush current integral (I²t)	< 1.3 A²s
AC frequency range	45 Hz ... 65 Hz
Frequency range DC	0 Hz
Mains buffering time	see diagram
Buffer period	20 min (5 A)
Rotary selector switch	adjustable: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; PC-Mode
Current consumption	0.95 A (230 V AC)
		1.1 A (230 V AC, maximum)
		1.7 A (120 V AC)
		1.8 A (120 V AC, maximum)
Protective circuit	Transient surge protection; Varistor
Power factor (cos phi)	approx. 0.5
Typical response time	150 ms (230 V AC)
Typical response time		200 ms (120 V AC)
Input fuse	6.3 A (slow-blow, internal)
Permissible backup fuse	B6 B10 B16
Recommended breaker for input protection	6 A ... 16 A (Characteristics B, C, D, K)

Output data

Efficiency	> 88 % (230 V AC, network operation)
		> 86 % (120 V AC, network operation)
		> 86 % (Battery operation)
Nominal output voltage	24 V DC
Setting range of the output voltage (U_Set)	22.5 V DC ... 29.5 V DC (Network operation; in the buffer mode, dependent on the battery voltage of 27.9 V DC ... 19.2 V DC)
Nominal output current (I_N)	5 A (-25 °C ... 55 °C)
Output current limit	max. 6 A (Mains operation)
Bridging time	3600 s
Derating	55 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance	35 V DC
Protection against overvoltage at the output (OVP)	< 35 V DC
Control deviation	< 1 % (change in load, static 10 % ... 90 %)
Residual ripple	< 10 mV_PP
Output power	120 W
Nominal power	120 W
Peak switching voltages nominal load	< 25 mV_PP
Maximum no-load power dissipation	2 W
Power loss nominal load max.	16 W (230 V AC)
Power loss nominal load max.		20 W (120 V AC)
Power dissipation battery operation	4 W
Rise time	< 100 ms
Connection in parallel	yes, 2
Connection in series	no
Mains operation
Nominal output voltage	24 V DC
Output voltage range	22.5 V DC ... 29.5 V DC
Nominal output current (I_N)	5 A
Battery operation
Nominal output voltage	24 V DC
Output voltage range	19.2 V DC ... 27.6 V DC (U_OUT = U_BAT - 0,5 V DC)
Nominal output current (I_N)	5 A
Signal
Output voltage	+ 24 V
Signal: Alarm
Output description	Transistor switching output
Maximum switching voltage	≤ 24 V
Output voltage	24 V
Continuous load current	≤ 200 mA
Signal: Battery charge
Output description	Transistor switching output
Maximum switching voltage	≤ 24 V
Output voltage	24 V
Continuous load current	≤ 200 mA
Signal: Battery mode
Output description	Transistor switching output
Maximum switching voltage	≤ 24 V
Output voltage	24 V
Continuous load current	≤ 200 mA

Energy storage

End-of-charge voltage	25 V DC ... 30 V DC (Default 27.6 V DC)
Charging current	1.5 A
Deep discharge protection	18 V DC ... 21 V DC (Default 19.2 V DC)
Memory medium	external, battery 1.3 Ah / 3.4 Ah / 7.2 Ah / 12 Ah
Battery presence check/time interval	60 s
Quality check of battery	4 h ... 200 h (Default 12 h)
Charge characteristic curve	I/U characteristic curve
IQ technology	no
Temperature compensation	0 mV/K ... 200 mV/K (42 mV/K by default)
Alarm signaling threshold	18 V DC ... 30 V DC (Default 20.4 V DC)
Network management	No

Connection data

Input
Connection method	Screw connection
Conductor cross-section, rigid min.	0.2 mm²
Conductor cross-section, rigid max.	2.5 mm²
Conductor cross-section flexible min.	0.2 mm²
Conductor cross-section flexible max.	2.5 mm²
Conductor cross-section AWG min.	24
Conductor cross-section AWG max.	12
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross-section, rigid min.	0.2 mm²
Conductor cross-section, rigid max.	2.5 mm²
Conductor cross-section flexible min.	0.2 mm²
Conductor cross-section flexible max.	2.5 mm²
Conductor cross-section AWG min.	24
Conductor cross-section AWG max.	12
Stripping length	8 mm
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Conductor cross-section, rigid min.	0.2 mm²
Conductor cross-section, rigid max.	2.5 mm²
Conductor cross-section flexible min.	0.2 mm²
Conductor cross-section flexible max.	2.5 mm²
Conductor cross-section AWG min.	24
Conductor cross-section AWG max.	12
Screw thread	M3
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm

Interfaces

Interface	IFS (Interface system data port)

Signaling

Types of signaling	LED
Signal output
Status display	LED (green)
Note on status display	Mains voltage OK: Green LED, static at
Signal output: Alarm
Status display	Alarm
Note on status display	Red LED, static at
Signal output: Battery charge
Status display	Battery (battery charge) is being charged
Note on status display	Yellow LED, flashing
Signal output: Battery mode
Status display	Battery operation (Battery Mode)
Note on status display	LED yellow, static at

Electrical properties

Insulation voltage input/output	4 kV (type test)
	2 kV (routine test)
Insulation voltage output / PE	500 V DC (routine test)
Insulation voltage input / PE	2 kV AC (type test)
	2 kV AC (routine test)

Product properties

Product type	DC UPS
IQ technology	no
MTBF (IEC 61709, SN 29500)	> 596000 h (40 °C)
Insulation characteristics
Protection class	I
Degree of pollution	2

Dimensions

Width	60 mm
Height	130 mm
Depth	118 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm

Mounting

Mounting type	DIN rail mounting
Assembly note	alignable: horizontally 0 mm, vertically 50 mm
Mounting position	horizontal DIN rail NS 35, EN 60715

Material specifications

Housing material	Metal
Housing material	Aluminum (AlMg3) / sheet steel, zinc-plated
Type of housing	Aluminum (AlMg3) + zinc-plated sheet steel, enclosed

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Climatic class	3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)	95 % (at 25 °C, non-condensing)
Shock	18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)	< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
	15 Hz ... 150 Hz, 2.3g, 90 min.

Standards and regulations

Rail applications	EN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations	EN 50178/VDE 0160 (PELV)
Standard – Limitation of mains harmonic currents	EN 61000-3-2
Standard - Electrical safety	EN 60950-1/VDE 0805 (SELV)
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment	EN 50178
Standard – Safety extra-low voltage	EN 60950-1 (SELV)
	EN 60204 (PELV)
Standard - Safe isolation	DIN VDE 0100-410

Approvals

Shipbuilding approval	DNV GL (EMC B)
UL approvals	UL/C-UL listed UL 508
	UL/C-UL Recognized UL 60950-1

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emission	EN 61000-6-3
EMC requirements for noise emission		EN 61000-6-4
EMC requirements for noise immunity	EN 61000-6-1
EMC requirements for noise immunity		EN 61000-6-2
Noise emission
Standards/regulations	EN 55011 (EN 55022)
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Housing	Level 3
Electrostatic discharge
Contact discharge	6 kV
Discharge in air	8 kV
Comments	Criterion B
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 2 GHz
Test field strength	10 V/m
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	4 kV (level 4 - asymmetrical: conductor to ground)
Output	2 kV (level 4 - asymmetrical: conductor to ground)
Signal	1 kV (level 4 - asymmetrical: conductor to ground)
Comments	Criterion B
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Surge voltage load (surge)
Input	4 kV (level 4 - asymmetrical: conductor to ground)
Input		2 kV (level 4 - symmetrical: conductor to conductor)
Output	2 kV (Level 3 - asymmetrical)
Output		1 kV (Level 3 - symmetrical)
Signal	2 kV (Level 3 - asymmetrical)
Signal		1 kV (Level 3 - symmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
Input/output/signal	Level 3
Frequency range	10 kHz ... 80 MHz
Comments	Criterion A
Voltage	10 V
Voltage dips
Standards/regulations	EN 61000-4-11
Emitted interference
Standards/regulations	EN 61000-6-3
Radio interference voltage in acc. with EN 55011	EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011	EN 55011 (EN 55022) Class B, area of application: Industry and residential

Item number	2866611
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	CM20
Product key	CMUT13
GTIN	4046356311809
Weight per piece (including packing)	1,108.8 g
Weight per piece (excluding packing)	939 g
Customs tariff number	85044095
Country of origin	CN

ECLASS-13.0	27040705
ECLASS-15.0	27040705

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-25 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	38bd1d00-5225-4075-acab-816c2885e6bf

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TRIO-UPS/1AC/24DC/ 5 - Uninterruptible power supply

2866611

Product details

ECLASS

ETIM

UNSPSC

DNV

cUL Recognized

UL Recognized

IECEE CB Scheme

EAC

IECEE CB Scheme

EAC

UL Listed

cUL Listed

KC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

TRIO-UPS/1AC/24DC/ 5 - Uninterruptible power supply 2866611

Product details

ECLASS

ETIM

UNSPSC

Compatible products

UPS-BAT/PB/24DC/1.2AH - Battery module 1274520

UPS-BAT/PB/24DC/4AH - Battery module 1274117

UPS-BAT/PB/24DC/7AH - Battery module 1274118

UPS-BAT/PB/24DC/12AH - Battery module 1274119

UPS-BAT/PB/24DC/20AH - Battery module 1348516

UPS-BAT/PB/24DC/40AH - Battery module 1354641

MINI-BAT/24DC/1.3AH - Battery module 2866417

QUINT-BAT/24DC/ 3.4AH - Battery module 2866349

QUINT-BAT/24DC/ 7.2AH - Battery module 2866352

QUINT-BAT/24DC/12AH - Battery module 2866365

SI FORM C 15 A DIN 72581 - Fuse 0913676

SI FORM C 25 A DIN 72581 - Fuse 0913757

IFS-USB-PROG-ADAPTER - Programming adapter 2811271

QUINT-PS-ADAPTERS7/2 - Mounting adapter 2938206

UWA 182/52 - Mounting adapter 2938235

UTA 107 - DIN rail adapter 2853983

IFS-CONFSTICK-L - Memory block 2901103

IFS-CONFSTICK - Memory block 2986122

IFS-USB-DATACABLE - Data cable 2320500

Your advantages

TRIO-UPS/1AC/24DC/ 5 - Uninterruptible power supply

2866611