Modular timer relay, passing make contact with plug-in miniature relay and screw connection
Product details
Product type
Relay Module
Product family
PLC-INTERFACE
Operating mode
100% operating factor
Mechanical service life
approx. 2x 107 cycles
Insulation characteristics: Air clearances and creepage distances
Insulation
Safe isolation, reinforced insulation (partition plate PLC-ATP should be installed for safe isolation between adjacent modules).
Overvoltage category
III
Pollution degree
3
Data management status
Date of last data management
19.03.2025
Maximum power dissipation for nominal condition
0.4 W
Coil side
Nominal input voltage UN
24 V DC
Input voltage range
19.2 V DC ... 26.4 V DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)
24 V DC
Typical input current at UN
15 mA (Relay ON)
4.3 mA (Relay OFF)
Typical response time
7 ms
Typical release time
200 ms +130 ms (Typical interval time at UN)
Protective circuit
Surge protection; Freewheeling diode
Operating voltage display
Yellow LED
Switching
Contact switching type
Single contact, 1 changeover contact
Type of switch contact
Single contact
Contact material
AgNi, hard gold-plated
Maximum switching voltage
250 V AC/DC (Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules.)
Minimum switching voltage
12 V AC/DC
Limiting continuous current
10 A
Maximum inrush current
16 A
Min. switching current
100 mA
Switching: when the gold layer is destroyed
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
144 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
4000 W (for 250 V AC)
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Width
14 mm
Height
80 mm
Depth
94 mm
Color
green (RAL 6021)
Flammability rating according to UL 94
V0 (Housing)
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 50 °C
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Air clearances and creepage distances
Standards/regulations
DIN EN 50178
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any
Item number
2307293
Packing unit
10 pc
Minimum order quantity
1 pc
Sales key
C461
Product key
DK623H
GTIN
4017918992743
Weight per piece (including packing)
72.08 g
Weight per piece (excluding packing)
72.08 g
Customs tariff number
85364900
Country of origin
DE
ECLASS
ECLASS-13.0
27371601
ETIM
ETIM 9.0
EC001437
UNSPSC
UNSPSC 21.0
39122300
cULus Listed
Approval ID: E140324
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
