FA MCR-EX-HT-1TS-I-OLP - Head-mounted transducer

1145217

Ex i-Output loop-powered head transmitter for transmitting RTD and TC sensor signals, as well as from resistance and voltage sensors via 4 mA ... 20 mA. HART, Standard configuration, Screw connection

Free download available. Downloads

Product details

Product type	Temperature transmitter
Product family	Field Analog
No. of channels	1
Configuration	Software
	HART
Insulation characteristics
Overvoltage category	II
Pollution degree	2

Functionality
Configuration	Software
	HART

Electrical isolation between input and output	yes
Step response (0–99%)	1 s (TC)
	1 s (RTD)
Electrical isolation Input/output
Test voltage	2 kV AC (50 Hz, 60 s)
Supply
Supply voltage range	(loop-powered, no external supply necessary)
	10 V DC ... 30 V DC (Ex)

Measurement
Number of inputs	1
Input voltage range	-20 mV ... 100 mV (Minimum measuring span: 5 mV)
Sensor types (RTD) that can be used	Pt, Ni, Cu sensors: 2, 3, 4-wire
Sensor types that can be used (TC)	A, B, C, D, E, J, K, L, N, R, S, T, U
Temperature measuring range	-250 °C ... 2500 °C (Range depending on the sensor type)
Temperature measuring range	≥ 10 K (RTD)
	≥ 50 K (TC)
Linear resistance measuring range	10 Ω ... 2000 Ω (Minimum measuring span: 10 Ω)

Signal: Current
Current output signal	4 mA ... 20 mA (HART)
	20 mA ... 4 mA (HART)
Max. current output signal	23 mA
Load	(U_L - 10 V) / 0.023 A
HART coding	FSK ± 0.5 mA
HART version	7
Transmission speed	1200 Baud
Mains frequency filter	50/60 Hz
Communication resistance	≥ 250 Ω
Switch-on delay	 7 s (HART)
	 7 s (Measured value)

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross-section rigid	0.2 mm² ... 2.5 mm²
Conductor cross-section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14
Tightening torque	0.5 Nm

Ex installation (EPL)	Gb
	Div. 1
Ex i circuits (EPL)	Ga
	Div. 1

Data communication (bypass)
Protocols supported	HART

Ambient conditions
Degree of protection	IP00 (upon installation in field housing IP66/67, NEMA 4X)
Ambient temperature (operation)	-40 °C ... 85 °C
Ambient temperature (storage/transport)	-50 °C ... 100 °C
Altitude	≤ 4000 m (Above sea level)
Climatic class	C1
Permissible humidity (operation)	5 % ... 95 % (condensation permitted)

CE
Certificate	CE-compliant
ATEX
Identification	 II 1G Ex ia IIC T6...T4 Ga
Certificate	EPS 20 ATEX 1 166 X
IECEx
Identification	II 1G Ex ia IIC T6...T4 Ga
Certificate	IECEx EPS 20.0060X
UKCA Ex (UKEX)
Certificate	CML 21UKEX21009X
CSA
Identification	IS for Class I, Div. 1, Groups A, B, C, D; T6...T4
	Ex ia IIC T6...T4 Ga

Mounting type	Installation
	DIN rail mounting
Assembly note	Installation in connection head according to DIN 43729 form B

Commercial data

Item number	1145217
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	NULL
Product key	DK1242
GTIN	4063151134983
Weight per piece (including packing)	186 g
Weight per piece (excluding packing)	70 g
Customs tariff number	85437090
Country of origin	DE

Classifications

Approvals

Environmental product compliance

Compatible products

Accessories

ECLASS-13.0	27210129
ECLASS-15.0	27210129

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

FA MCR-EX-HT-1TS-I-OLP - Head-mounted transducer

1145217

Product details

ECLASS

ETIM

UNSPSC

IECEx

CSA

ATEX

CSAus

Compatible products

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

FA MCR-EX-HT-1TS-I-OLP - Head-mounted transducer 1145217

Product details

ECLASS

ETIM

UNSPSC

Compatible products

MCR-PAC-T-USB - Programming adapter 2309000

GW HART USB MODEM - Cable adapter 1003824

MCR-DIN-RAIL-ADAPTER HT - Adapter 2864671

FA MCR-HT-D - Display 2908735

FA MCR-HT-FH - Electronics housing 2908736

FA MCR-HT-FH-WM - Mounting kit 2908737

FA MCR-HT-FH-PM - Mounting kit 2908738

FA MCR-EX-HT-1TS-I-OLP - Head-mounted transducer

1145217