Terminal block with surge voltage fine protection between clamping connector and DIN rail, nominal voltage: 60 V DC, for mounting on NS 32 or NS 35/7.5, terminal width: 6.2 mm, terminal height: 47 mm
Product details
Product type
Surge protection for MCR technology
IEC test classification
C3
VDE requirement class
C3
Type
Single-level terminal block
Number of positions
1
Surge protection fault message
none
Nominal voltage UN
60 V DC
Connection method
Screw connection
Screw thread
M3
Tightening torque
0.8 Nm
Conductor cross-section flexible
0.2 mm² ... 4 mm²
Conductor cross-section rigid
0.2 mm² ... 4 mm²
Conductor cross-section AWG
24 ... 12
Width
6.2 mm
Height
47 mm
Length
42.5 mm
Flammability rating according to UL 94
V-2
Housing material
PA
Mechanical data
Open side panel
Yes
Direction of action
Line-Earth Ground
Maximum continuous operating voltage UC
70 V DC
49 V AC
Rated current
32 A (50 °C)
Protective conductor current IPE
≤ 5 µA
Nominal discharge current In (8/20) µs (line-ground)
69 A (per path)
Total surge current (8/20) µs
69 A
Max. discharge current Imax (8/20) µs maximum (line-earth)
69 A
Nominal pulse current Ian (10/1000) µs (line-earth)
13.3 A
Output voltage limitation at 1 kV/µs (line-earth) spike
≤ 100 V
Output voltage limitation at 1 kV/µs (line-earth) static
≤ 100 V
Residual voltage at In (conductor-ground)
≤ 120 V
Response time tA (line-earth)
≤ 1 ns
Cut-off frequency fg (3 dB), asym. (PE) in 150 Ω system
