1. Home
  2. Products
  3. Relays and optocouplers
  4. Solid-state relays and electromechanical relays
  5. EIK1-SVN-24P - Solid-state relay module

EIK1-SVN-24P - Solid-state relay module
2940799

Switching amplifier electronic terminal block, for inductive proximity sensors acc. to NAMUR, with light indicators for sensor signal and faults

Product Details

Note on application Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.
Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area
Product type Solid-state relay module
Application NAMUR proximity sensors
Insulation characteristics: Air clearances and creepage distances
Overvoltage category III
Pollution degree 2
Control circuit
Nominal input voltage UN 8.2 V DC ±10 %
Error indication visual short-circuit and wire break control with LED (red)
Protective circuit 12 V Zener diode; 12 V Zener diode
Transmission frequency 1 kHz
Switching point ≥ 2.1 mA (In conductive state)
≤ 1.2 mA (In blocking state)
6.3 mA ... 10 mA (in the event of a short-circuit)
0 mA ... 0.35 mA (In the event of a wire break)
Switching hysteresis approx. 0.2 mA
Internal resistance approx. 1 kΩ
Designation Signal output
Contact type 1 N/O contact
Design of digital output electronic
Output nominal voltage ≤ 100 mV (In conductive state)
UVN - UR; in blocking state
Limiting continuous current 50 mA
Voltage drop at max. limiting continuous current ≤ 1.5 V (UR)
Protective circuit 36 V Zener diode as free-wheeling diode; 36 V Zener diode as free-wheeling diode
Input side
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 4 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12
Tightening torque 0.5 Nm
Output side
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 4 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12
Tightening torque 0.5 Nm
Width 6.2 mm
Height 80 mm
Depth 56 mm
Ambient conditions
Ambient temperature (operation) -25 °C ... 50 °C
Ambient temperature (storage/transport) -25 °C ... 70 °C
Air clearances and creepage distances
Standards/regulations IEC 60664
EN 61000-6-2
EN 61000-6-4
Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any
Item number 2940799
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C05
Product Key CK6153
Catalog Page Page 454 (C-5-2019)
GTIN 4017918080242
Weight per Piece (including packing) 22.17 g
Weight per Piece (excluding packing) 21.1 g
Customs tariff number 85364190
Country of origin CN

ECLASS

ECLASS-9.0 27371604
ECLASS-10.0.1 27371604
ECLASS-11.0 27371604

ETIM

ETIM 8.0 EC001504

UNSPSC

UNSPSC 21.0 39122300

EAC

Approval ID: RU C-DE.A*30.B.01742
REACh SVHC Lead 7439-92-1
Hexahydromethylphthalic anhydride
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products

Your advantages

Bridging and labeling with standard terminal block accessories
Error indication via LED
Monitoring of initiator side for short circuits or wire breaks
Status indication (high signal) via green LED
Suitable resistance circuit to enable monitoring of mechanical switches
24 V/50 mA digital output