DEK-OV- 12DC/ 24DC/ 3 - Solid-state relay terminal block

2941387

Power solid-state relay terminal block, input: 12 V DC, output: 3 - 30 V DC/3 A, terminal block width: 6.2 mm

Note on application	Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Product type	Solid-state relay module
Product family	DEK
Application	Output function
Operating mode	100% operating factor
Insulation characteristics: Standards/regulations
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	03.05.2024

Maximum power dissipation for nominal condition	0.1 W
Test voltage (Input/output)	2.5 kV AC (Input/output)

Nominal input voltage U_N	12 V DC
Input voltage range in reference to U_N	0.8 ... 1.2
Input voltage range	9.6 V DC ... 14.4 V DC
Switching threshold "0" signal in reference to U_N	≤ 0.4
Switching threshold "1" signal in reference to U_N	≥ 0.8
Typical input current at U_N	8.5 mA
Typical response time	40 µs
Typical turn-off time	200 µs
Operating voltage display	Yellow LED
Protective circuit	Reverse polarity protection
Transmission frequency	300 Hz

Contact switching type	1 N/O contact
Design of digital output	electronic
Output voltage range	3 V DC ... 30 V DC
Limiting continuous current	3 A (see derating curve)
Voltage drop at max. limiting continuous current	≤ 0.2 V
Output circuit	2-conductor, floating
Protective circuit	Reverse polarity protection; Polarity protection diode
	Surge protection

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm

Width	6.2 mm
Height	80 mm
Depth	56 mm

Color	green (RAL 6021)

Ambient conditions
Ambient temperature (operation)	-20 °C ... 60 °C
Ambient temperature (storage/transport)	-20 °C ... 70 °C

Standards/regulations
Standards/regulations	IEC 60947-5-1

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Item number	2941387
Packing unit	10 pc
Minimum order quantity	1 pc
Sales key	C460
Product key	DK61A1
Catalog page	Page 443 (C-5-2019)
GTIN	4017918080402
Weight per piece (including packing)	22 g
Weight per piece (excluding packing)	21.6 g
Customs tariff number	85364190
Country of origin	CN

Compatible products

Accessories

Your advantages

Actuator version available

EB-DIK insertion bridges

Labeling and mounting with user-friendly modular terminal blocks

Wear-free switching of up to 24 V DC/10 A or 240 V AC/800 mA

Integrated output protective circuit

Integrated input circuit

Electrical isolation between input and output at up to 2.5 kVrms

Status indicator

Zero voltage switch at AC output

ECLASS-11.0	27371604
ECLASS-12.0	27371604
ECLASS-13.0	27371604

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Hexahydromethylphthalic anhydride (CAS: n/a)
REACH candidate substance (CAS No.)		Lead (CAS: 7439-92-1)
SCIP	1e045cb3-46b4-4ae8-ab4a-01798a639304

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-OV- 12DC/ 24DC/ 3 - Solid-state relay terminal block

2941387

Product details

ECLASS

ETIM

UNSPSC

EAC

cULus Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-OV- 12DC/ 24DC/ 3 - Solid-state relay terminal block 2941387

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EB 2- DIK RD - Insertion bridge 2716693

EB 3- DIK RD - Insertion bridge 2716745

EB 4- DIK RD - Insertion bridge 2716758

EB 5- DIK RD - Insertion bridge 2716761

EB 10- DIK RD - Insertion bridge 2716774

EB 80- DIK RD - Insertion bridge 2715953

EB 5- DIK BU - Insertion bridge 2716677

EB 10- DIK BU - Insertion bridge 2716680

EB 80- DIK BU - Insertion bridge 2715940

D-DEK 1,5 GN - Separating plate 2716949

ZB 6:UNBEDRUCKT - Zack marker strip 1051003

ZB 6,LGS:FORTL.ZAHLEN - Zack marker strip 1051016

ZB 6/WH-100:UNBEDRUCKT - Zack marker strip 5060935

DIKD 1,5 - Initiator/actuator terminal block 2715979

Your advantages

DEK-OV- 12DC/ 24DC/ 3 - Solid-state relay terminal block

2941387