1. Home
  2. Products
  3. Relays and optocouplers
  4. Solid-state relays and electromechanical relays
  5. DEK-OE- 5DC/ 24DC/100KHZ - Solid-state relay terminal block

DEK-OE- 5DC/ 24DC/100KHZ - Solid-state relay terminal block
2964270

Input solid-state relay, transmission frequency: 100 kHz, with LED and protective circuit in input and output circuits, input: 5 V DC, output: 4 - 30 V DC/50 mA

Product Details

Note on application Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.
Product type Solid-state relay module
Product family DEK
Application 100 kHz input optocoupler
Operating mode 100% operating factor
Insulation characteristics
Insulation Basic insulation
Insulation characteristics
Insulation Basic insulation
Overvoltage category II
Pollution degree 2
Test voltage (Input/output) 2.5 kV AC (Input/output)
Nominal input voltage UN 5 V DC
Input voltage range in reference to UN 0.8 ... 1.2
Input voltage range 4 V DC ... 6 V DC
Switching threshold "0" signal in reference to UN ≤ 0.4
Switching threshold "1" signal in reference to UN ≥ 0.8
Typical input current at UN 7 mA
Typical response time 1.5 µs
Typical turn-off time 2 µs
Operating voltage display Yellow LED
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection
Transmission frequency 100 kHz
Contact type 1 N/O contact
Design of digital output electronic
Output voltage range 4 V DC ... 30 V DC
Limiting continuous current 50 mA
Quiescent current 4.3 mA
Voltage drop at max. limiting continuous current ≤ 0.5 V DC
Output circuit 3-conductor, ground-referenced
Protective circuit Surge protection; Suppressor diode
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14
Tightening torque 0.5 Nm
Width 6.2 mm
Height 80 mm
Depth 56 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -20 °C ... 70 °C
Standards/regulations IEC 60947-5-1
Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any
Item number 2964270
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C05
Product Key CK61D1
Catalog Page Page 452 (C-5-2019)
GTIN 4017918107406
Weight per Piece (including packing) 21.46 g
Weight per Piece (excluding packing) 21.46 g
Customs tariff number 85364190
Country of origin CN

ECLASS

ECLASS-9.0 27371604
ECLASS-10.0.1 27371604
ECLASS-11.0 27371604

ETIM

ETIM 8.0 EC001504

UNSPSC

UNSPSC 21.0 39122300

EAC

Approval ID: TR_TS_D_00573_c
REACh SVHC Lead 7439-92-1
Hexahydromethylphthalic anhydride
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products

Your advantages

With capacitor on the input side for interference suppression
Limit frequency of up to 100 kHz
Push/pull stage on output side
Includes signal inputs on PLC counter boards