DEK-OE-230AC/ 48DC/100/SO 46 - Solid-state relay terminal block

2964678

Solid-state relay interface designed to prevent interference on the control side, input: 230 V AC, output: 48 V DC/100 mA

Order information:	The housing is open on one side. The appropriate cover is D-DEK 1,5 GN (2716949).
Note on application	Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place.

Product type	Solid-state relay module
Product family	DEK
Application	Filter to prevent interference
Operating mode	100% operating factor
Insulation characteristics
Insulation	Basic insulation
Overvoltage category	III
Pollution degree	2
Data management status
Date of last data management	03.05.2024

Test voltage (Input/output)	2.5 kV AC (Input/output)

Nominal input voltage U_N	230 V AC
Input voltage range in reference to U_N	0.9 ... 1.1
Input voltage range	207 V AC ... 253 V AC
Switching threshold "0" signal, voltage	≤ 92 V AC
Switching threshold "1" signal voltage	> 207 V AC
Typical input current at U_N	2.5 mA
Typical response time	4.4 ms
Typical turn-off time	14 ms
Operating voltage display	Yellow LED
Protective circuit	Surge protection; Varistor
	RC element; RC element
Transmission frequency	5 Hz

Contact switching type	1 N/O contact
Design of digital output	electronic
Output voltage range	3 V DC ... 48 V DC
Limiting continuous current	100 mA
Voltage drop at max. limiting continuous current	≤ 0.9 V
Output circuit	3-conductor, ground-referenced
Protective circuit	Reverse polarity protection; Polarity protection diode
	Free running; Freewheeling diode

Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm

Width	6.2 mm
Height	80 mm
Depth	56 mm

Color	green (RAL 6021)

Ambient conditions
Ambient temperature (operation)	0 °C ... 50 °C
Ambient temperature (storage/transport)	0 °C ... 70 °C

Standards/regulations	IEC 60947-5-1

Mounting type	DIN rail mounting
Assembly note	in rows with zero spacing
Mounting position	any

Item number	2964678
Packing unit	10 pc
Minimum order quantity	1 pc
Sales key	C460
Product key	DK61A1
Catalog page	Page 447 (C-5-2019)
GTIN	4017918131067
Weight per piece (including packing)	21.805 g
Weight per piece (excluding packing)	21.805 g
Customs tariff number	85364900
Country of origin	CN

Compatible products

Accessories

Your advantages

Use of AC output cards, resulting in residual AC currents

Resistant to interference currents

Applications with long control lines

High relay release voltage

ECLASS-11.0	27371604
ECLASS-12.0	27371604
ECLASS-13.0	27371604

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	423d3e8f-0843-48cf-a7c2-0f71ce380bf2

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-OE-230AC/ 48DC/100/SO 46 - Solid-state relay terminal block

2964678

Product details

ECLASS

ETIM

UNSPSC

EAC

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

DEK-OE-230AC/ 48DC/100/SO 46 - Solid-state relay terminal block 2964678

Product details

ECLASS

ETIM

UNSPSC

Compatible products

EB 2- DIK RD - Insertion bridge 2716693

EB 3- DIK RD - Insertion bridge 2716745

EB 4- DIK RD - Insertion bridge 2716758

EB 5- DIK RD - Insertion bridge 2716761

EB 10- DIK RD - Insertion bridge 2716774

EB 80- DIK RD - Insertion bridge 2715953

EB 5- DIK BU - Insertion bridge 2716677

EB 10- DIK BU - Insertion bridge 2716680

EB 80- DIK BU - Insertion bridge 2715940

D-DEK 1,5 GN - Separating plate 2716949

ZB 6:UNBEDRUCKT - Zack marker strip 1051003

ZB 6,LGS:FORTL.ZAHLEN - Zack marker strip 1051016

ZB 6/WH-100:UNBEDRUCKT - Zack marker strip 5060935

DIKD 1,5 - Initiator/actuator terminal block 2715979

Your advantages

DEK-OE-230AC/ 48DC/100/SO 46 - Solid-state relay terminal block

2964678