Plug-in octal relay with power contacts, specially designed for switching high DC loads, 1 N/O contact, detectable manual operation, status LED, blowout magnet, coil voltage: 230 V AC
Product details
Product type
Single relay
Operating mode
100% operating factor
Mechanical service life
approx. 107 cycles
Insulation characteristics
Overvoltage category
III
Pollution degree
3
Data management status
Date of last data management
20.03.2025
Test voltage (Winding/contact)
2.5 kVrms (50 Hz, 1 min., winding/contact)
Coil side
Nominal input voltage UN
230 V AC
Input voltage range
149.5 V AC ... 345 V AC
Input voltage range in reference to UN
see diagram
Typical input current at UN
11 mA
Typical response time
5 ms ... 20 ms (depending on phase relation)
Typical release time range
5 ms ... 20 ms (depending on phase relation)
Operating voltage display
Yellow LED
Coil resistance
6.85 kΩ ±10 %
Switching
Contact switching type
1 N/O contact
Type of switch contact
Single contact
Note regarding the switch contact
Series connection, 2 N/O contacts with blowout magnet
Contact material
AgNi
Maximum switching voltage
250 V AC
220 V DC
Minimum switching voltage
10 V (at 10 mA)
Limiting continuous current
10 A
Maximum inrush current
30 A (20 ms)
Min. switching current
10 mA (at 10 V)
Interrupting rating (ohmic load) max.
2500 VA (for 250 V AC)
Width
35 mm
Height
35 mm
Depth
58.5 mm
Ambient conditions
Degree of protection
RT I
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Standards/regulations
IEC 61810
EN 60947
Assembly note
On relay base PR3
Mounting position
any
Item number
2901907
Packing unit
1 pc
Note
Made to order (non-returnable)
Sales key
C460
Product key
DK6193
GTIN
4046356667258
Weight per piece (including packing)
92.39 g
Weight per piece (excluding packing)
92.39 g
Customs tariff number
85364900
Country of origin
IN
China RoHS
Environment friendly use period (EFUP)
EFUP-5
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
