PSR-MC45-3NO-1DO-24DC-SP - Safety relays

1082029

Safety relay for emergency stop, safety doors and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic or manual, monitored start, 3 enabling current paths, U_S = 24 V DC, pluggable Push-in terminal block

Free Download available. Downloads

Item number	1082029
Packing unit	1 pc
Minimum order quantity	1 pc
Product Key	DNA181
GTIN	4055626811956
Weight per Piece (including packing)	224.7 g
Weight per Piece (excluding packing)	180.24 g
Country of origin	DE



EAC

Approval ID: RU*C-DE.*08.B.00010



EAC

Approval ID: RU D-DE.B*00573/18



UL Listed

Approval ID: FILE E 140324



cUL Listed

Approval ID: FILE E 140324



Functional Safety

Approval ID: 44-780-15124316



Functional Safety

Approval ID: 44-205-15124316

Compatible Products

Product type	Safety relays
Product family	PSRmini
Application	Emergency stop
		Safety door
		Transponder
		Light grid
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Times
Typical response time	< 100 ms (automatic start)
Typical response time		< 100 ms (manual, monitored start)
Typ. starting time with U_s	< 100 ms (when controlled via A1)
Typical release time	< 20 ms (on demand via the sensor circuit)
Typical release time		< 20 ms (when controlled via A1; applicative deactivation via A1/A2 is not permitted)
Restart time	< 1 s (Boot time)
Recovery time	500 ms (following demand of the safety function)

Maximum power dissipation for nominal condition	17.21 W (at U_B = 30 V , I_L² = 72 A²)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V AC
Rated insulation voltage		250 V AC
Rated surge voltage/insulation	Basic insulation 4 kV between all current paths
Rated surge voltage/insulation		Basic insulation 4 kV between all current paths and housing
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	19.2 V DC ... 30 V DC
Rated control circuit supply voltage U_S	24 V DC -20 % / +25 % (provide external protection)
Rated control supply current I_S	typ. 75 mA
Power consumption at U_S	typ. 1.8 W
Inrush current	typ. 2.2 A (Δt = 300 µs at U_s)
Filter time	1 ms (at A1 in the event of voltage dips at U_s)
Protective circuit	Serial protection against polarity reversal
Protective circuit		Suppressor diode 33 V

Digital: Sensor circuit (S10, S12, S22)
Description of the input	safety-related sensor inputs
Description of the input		NPN (S10, S12), PNP (S22)
Number of inputs	3
Input voltage range "0" signal	0 V ... 5 V (S10, S12)
Input voltage range "1" signal	19.2 V ... 30 V
Input current range "0" signal	0 mA ... 2 mA (S10, S12)
Inrush current	< 5 mA (Typically with U_S at S10/S12, Δt = 500 µs)
Inrush current		> -5 mA (typ. with U_S at S22, Δt = 500 µs)
Filter time	max. 3 ms (Test pulse width of low test pulses)
		> 1 s (Test pulse rate for low test pulse)
		Where test pulse width < 1 ms: test pulse rate = 5 x test pulse width
		max. 1 ms (Test pulse width, high test pulse)
		> 100 ms (Test pulse rate, high test pulse)
		Unless test pulses are safety-related, they should be disabled.
Concurrence	∞
Max. permissible overall conductor resistance	150 Ω
Protective circuit	Suppressor diode 38.6 V
Current consumption	< 4 mA (typically with U_S at S10/S12)
Current consumption		> -15 mA (typically with U_S at S22/0 V)
Digital: Start circuit (S34, S35)
Description of the input	non-safety-related
Description of the input		NPN
Number of inputs	2
Input voltage range "1" signal	19.2 V DC ... 30 V DC
Inrush current	< 10 mA (typically with U_S, Δt = 500 µs)
Max. permissible overall conductor resistance	150 Ω
Protective circuit	Suppressor diode 38.6 V
Current consumption	2.5 mA (Typically with U_S at S34)
Current consumption		1 mA (Typically with U_S at S35)

Relay: Enabling current paths (13/14, 23/24, 33/34)
Output description	2 N/O contacts each in series, safety-related, floating
Number of outputs	3
Contact type	3 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 5 V AC/DC
Switching voltage		max. 250 V AC/DC (Observe the load curve)
Switching capacity	min. 50 mW
Inrush current	min. 10 mA AC/DC
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	5 A (24 V (DC13))
Switching capacity in accordance with IEC 60947-5-1		5 A (250 V (AC15))
Limiting continuous current	6 A
Sq. Total current	72 A² (observe derating)
Switching frequency	0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	6 A gL/gG
Signal: M1
Output description	PNP
Output description		non-safety-related
Number of outputs	1
Voltage	approx. 23 V DC (U_s - 1 V)
Current	max. 100 mA
Maximum inrush current	1 A (Δt = 5 ms at U_s)
Switching frequency	0.5 Hz (ohmic)
Protective circuit	33 V suppressor diode
Short-circuit protection	Yes

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 1.5 mm²
Conductor cross section flexible	0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve	0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG	24 ... 16
Stripping length	8 mm

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-MC45-3NO-1DO-24DC-SP - Safety relays

1082029

Product Details

ECLASS

ETIM

UNSPSC

EAC

EAC

UL Listed

cUL Listed

Functional Safety

Functional Safety

Compatible Products

Your advantages

Status display	2 x green LEDs
Operating voltage display	1 x green LED

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4
Performance level (PL)	e (5 A DC13; 8760 switching cycles/year or 5 A AC15; 2190 switching cycles/year)
Safety data: IEC 61508 - High demand
Equipment type	Type A
Safety Integrity Level (SIL)	3
Probability of a hazardous failure per hour (PFH_D)	1.00 x 10^-9 (5 A DC13; 8760 switching cycles/year or 5 A DC13; 5 A AC15; 2190 switching cycles/year)
Proof test interval	240 Months
Duration of use	240 Months
Safety data: IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	3
Probability of a hazardous failure on demand (PFD_AVG)	1.16 x 10^-4
Proof test interval	56 Months
Duration of use	240 Months

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-40 °C ... 60 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g for Δt = 11 ms (continuous shock: 10g for Δt = 16 ms)
Vibration (operation)	10 Hz ... 150 Hz, 2g

Air clearances and creepage distances between the power circuits
Standards/regulations	EN 60947-5-1

Mounting type	DIN rail mounting
Assembly instructions	See derating curve
Mounting position	vertical or horizontal
Connection method	Push-in connection


REACh SVHC	Lead 7439-92-1

China RoHS	Environmentally Friendly Use Period = 50 years
		For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Width	22.5 mm
Height	117.4 mm
Depth	114.5 mm

CE
Identification	CE-compliant

ECLASS-11.0	27371819
ECLASS-12.0	27371819
ECLASS-13.0	27371819

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-MC45-3NO-1DO-24DC-SP - Safety relays 1082029

Product Details

ECLASS

ETIM

UNSPSC

Compatible Products

CP-MSTB - Coding profile 1734634

CR-MSTB - Coding section 1734401

CRIMPFOX 6 - Crimping pliers 1212034

Your advantages

PSR-MC45-3NO-1DO-24DC-SP - Safety relays

1082029