PSR-MC38-2NO-1DO-24DC-PI - Safety relays - 1009832

Notes

Note on application
Note on application	Only for industrial use

Product properties

Product type	Safety relays
Product family	PSRmini
Application	Emergency stop
		Safety door
		Light grid
		Solenoid switch
		Transponder
Relay type	Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Data management status
Article revision	00
Times
Typical response time	30 ms (manual, monitored start)
Typical response time		200 ms (automatic start)
Typ. starting time with U_s	200 ms (when controlled via A1)
Typical release time	25 ms (when actuation is via the sensor circuit)
Typical release time		60 ms (when controlled via A1)
Restart time	< 1 s (Boot time)
Recovery time	< 500 ms

Electrical properties

Maximum power dissipation for nominal condition	16.6 W (at U_S = 26.4 V, I_L² = 72 A²)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated insulation voltage		250 V
Rated surge voltage/insulation	See section “Insulation coordination”
Supply
Designation	A1/A2
Rated control circuit supply voltage U_S	20.4 V DC ... 26.4 V DC
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 % (provide external protection)
Rated control supply current I_S	typ. 75 mA
Power consumption at U_S	typ. 1.8 W
Inrush current	< 4 A (Δt = 3 ms at U_s)
Filter time	20 ms (at A1 in the event of voltage dips at U_s)
Protective circuit	Serial protection against polarity reversal; Suppressor diode

Input data

Digital: Sensor circuit (S10, S12, S13, S22)
Description of the input	safety-related sensor inputs
Number of inputs	4
Input voltage range "1" signal	20.4 V DC ... 26.4 V DC
Inrush current	< 40 mA (typ. with U_S at S10)
		< 300 mA (typ. with U_S at S12, Δt = 150 ms)
		< 3 mA (typ. with U_S at S13)
		> -300 mA (typically with U_S at S22, Δt = 150 ms)
Filter time	2 ms (At S10, S12, S13; test pulse width of low test pulses)
		1 s (At S10, S12, S13; test pulse rate of low test pulses)
		No brightness test pulses / high test pulses permitted.
Concurrence	∞
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Suppressor diode
Current consumption	40 mA (typ. with U_S at S10)
		45 mA (typ. with U_S at S12)
		3 mA (typ. with U_S at S13)
		-35 mA (typically with U_S at S22, Δt = 150 ms)
Digital: Start circuit (Y1, S34, S35)
Description of the input	non-safety-related
Input voltage range "1" signal	20.4 V DC ... 26.4 V DC
Inrush current	< 60 mA (typ. with U_S at Y1, Δt = 150 ms)
		< 270 mA (typ. with U_S at S34, Δt = 15 ms)
		< 80 mA (typ. with U_S at S35, Δt = 25 ms)
Filter time	No darkness test pulses / low test pulses permitted. No brightness test pulses / high test pulses permitted.
Max. permissible overall conductor resistance	50 Ω
Protective circuit	Suppressor diode
Current consumption	typ. 10 mA (typ. with U_S at Y1)
Current consumption		typ. 34 µA (typ. with U_S at S35)

Output data

Relay: Enabling current path (13/14, 23/24)
Output description	safety-related N/O contacts
Output description		2 NO contacts each in series, without delay, floating
Number of outputs	2 (undelayed)
Contact switching type	2 enabling current paths
Contact material	AgSnO₂
Switching voltage	min. 10 V AC/DC
Switching voltage		max. 250 V AC/DC (Observe the load curve)
Switching capacity	min. 100 mW
Inrush current	min. 10 mA
Inrush current		max. 6 A
Switching capacity in accordance with IEC 60947-5-1	5 A (24 V (DC13))
Switching capacity in accordance with IEC 60947-5-1		5 A (250 V (AC15))
Limiting continuous current	6 A
Sq. Total current	72 A² (observe derating)
Switching frequency	max. 0.5 Hz
Mechanical service life	10x 10⁶ cycles
Output fuse	10 A gL/gG
Output fuse		4 A gL/gG (for low-demand applications)
Signal: Y30
Output description	PNP
Output description		non-safety-related
Number of outputs	1
Voltage	approx. 23.9 V DC (U_s - 0.1 V)
Current	max. 100 mA
Maximum inrush current	500 mA (Δt = 1 ms at U_s)
Protective circuit	Suppressor diode

Connection data

Connection technology
pluggable	yes
Conductor connection
Connection method	Push-in connection
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross-section AWG	24 ... 14
Stripping length	10 mm

Signaling

Status display	4 x LED (green)
Operating voltage display	1 x green LED

Dimensions

Width	22.5 mm
Height	117.5 mm
Depth	114.5 mm

Material specifications

Color (Housing)	yellow (RAL 1018)
Housing material	Polyamide

Characteristics

Safety data
Stop category	0
Safety data: EN ISO 13849
Category	4 (5 A DC13; 5 A AC15; 8760 switching cycles/year)
Performance level (PL)	e
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)	3
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)	3
Safety data: EN IEC 62061
Safety Integrity Level (SIL)	3

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Min. degree of protection of inst. location	IP54
Ambient temperature (operation)	-20 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 70 °C
Maximum altitude	≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)	75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)	75 % (on average, 85% infrequently, non-condensing)
Shock	15g
Vibration (operation)	10 Hz ... 150 Hz, 2g

Approvals

CE
Identification	CE-compliant

Standards and regulations

Air clearances and creepage distances between the power circuits
Standards/regulations	IEC 60664-1

Mounting

Mounting type	DIN rail mounting
Assembly note	See derating curve
Mounting position	vertical or horizontal

Item number	1009832
Packing unit	1 pc
Minimum order quantity	1 pc
Sales key	DN01
Product key	DNA181
Catalog page	Page 223 (C-6-2019)
GTIN	4055626482712
Weight per piece (including packing)	201.9 g
Weight per piece (excluding packing)	169.38 g
Customs tariff number	85371098
Country of origin	DE

ECLASS-11.0	27371819
ECLASS-12.0	27371819
ECLASS-13.0	27371819

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)
SCIP	1e4df946-7ee5-4c2b-a4eb-460a3b26a1ed

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-MC38-2NO-1DO-24DC-PI - Safety relays

1009832

Product details

ECLASS

ETIM

UNSPSC

Functional Safety

Functional Safety

Functional Safety

Functional Safety

cULus Listed

cULus Listed

Compatible products

Your advantages

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

PSR-MC38-2NO-1DO-24DC-PI - Safety relays 1009832

Product details

ECLASS

ETIM

UNSPSC

Compatible products

PSR-TBUS - DIN rail bus connectors 2890425

ME 17,5 TBUS 1,5/ 5-ST-3,81 GN - DIN rail bus connectors 2709561

ELR H5-IES-PT- 24DC/500AC-3-P - Hybrid motor starter 2909556

ELR H5-IES-PT- 24DC/500AC-9-P - Hybrid motor starter 2909554

ELR H5-IS-SC- 24DC/500AC-3-P - Hybrid motor starter 2908699

ELR H5-IS-SC- 24DC/500AC-9-P - Hybrid motor starter 2908697

ELR H5-IS-PT- 24DC/500AC-3-P - Hybrid motor starter 2909569

ELR H5-IS-PT- 24DC/500AC-9-P - Hybrid motor starter 2909567

ELR H3-IS-SC- 24DC/500AC-3-P - Hybrid motor starter 2908700

ELR H3-IS-SC- 24DC/500AC-9-P - Hybrid motor starter 2908698

ELR H3-IS-PT- 24DC/500AC-3-P - Hybrid motor starter 2909570

ELR H3-IS-PT- 24DC/500AC-9-P - Hybrid motor starter 2909568

ELR-TBUS-22,5-P - DIN rail bus connectors 2203861

PSR-TBUS - 1PCS - DIN rail bus connectors 1326060

CRIMPFOX 6 - Crimping pliers 1212034

Your advantages

PSR-MC38-2NO-1DO-24DC-PI - Safety relays

1009832