PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Screw connection, 2 changeover contacts, Bridge rectifier, Input voltage: 24 V AC/DC
Product details
Product type
Relay Module
Product family
PLC-INTERFACE
Application
Palm switch
Operating mode
100% operating factor
Mechanical service life
5x 106 cycles
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation
Safe isolation, reinforced insulation
Overvoltage category
III
Pollution degree
2
Data management status
Date of last data management
13.01.2025
Maximum power dissipation for nominal condition
0.44 W
Test voltage (Winding/contact)
4 kVrms (50 Hz, 1 min.)
Test voltage (Changeover contact/changeover contact)
2.5 kVrms (50 Hz, 1 min.)
Air clearances and creepage distances between the power circuits
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
Coil side
Nominal input voltage UN
24 V AC/DC
Input voltage range
20.6 V AC/DC ... 33.6 V AC/DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)
24 V DC
Drive and function
monostable
Drive (polarity)
polarized
Typical input current at UN
18 mA
Typical response time
3 ms ... 15 ms
Typical release time range
3 ms ... 15 ms
Protective circuit
Bridge rectifier; Bridge rectifier
Operating voltage display
Yellow LED
Switching
Contact switching type
2 changeover contacts
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
12 V (10 mA)
Limiting continuous current
6 A
Maximum inrush current
12 A (20 ms)
Min. switching current
10 mA (12 V)
Interrupting rating (ohmic load) max.
192 W (24 V DC)
62 W (48 V DC)
42 W (60 V DC)
55 W (110 V DC)
66 W (220 V DC)
2000 VA (250 V AC)
Switching capacity
1 A (24 V (DC13))
1.5 A (230 V, AC15)
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Tightening torque
0.6 Nm ... 0.8 Nm
Width
14 mm
Height
80 mm
Depth
104 mm
Color
gray (RAL 7042)
Flammability rating according to UL 94
V0 (Housing)
Ambient conditions
Degree of protection (Relay)
RT II
Degree of protection (Relay base)
IP20
Degree of protection (Installation location)
≥ IP54
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
CE
Certificate
CE-compliant
UKCA
Certificate
UKCA-compliant
UL, USA
Identification
UL 508
UL 508 Recognized
UL, USA/Canada
Identification
UL 508
UL 508 Recognized
Shipbuilding approval
Certificate
TAE0000196
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Shipbuilding data
Temperature
D
Humidity
A
Vibration
B/C
EMC
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Electromagnetic compatibility
Conformance with EMC directive
Low Voltage Directive
Conformance with Low Voltage Directive
Air clearances and creepage distances between the power circuits
Standards/regulations
IEC 60947-5-1
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any
Item number
2910503
Packing unit
10 pc
Minimum order quantity
10 pc
Note
Made to order (non-returnable)
Sales key
C461
Product key
DK623C
Catalog page
Page 368 (C-5-2019)
GTIN
4055626486086
Weight per piece (including packing)
80.57 g
Weight per piece (excluding packing)
67 g
Customs tariff number
85364190
Country of origin
DE
ECLASS
ECLASS-11.0
27371601
ECLASS-12.0
27371601
ECLASS-13.0
27371601
ETIM
ETIM 9.0
EC001437
UNSPSC
UNSPSC 21.0
39122300
EAC
Approval ID: RU*C-DE.*08.B.00010
DNV GL
Approval ID: TAE0000196
cULus Listed
Approval ID: E140324
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)
Hexahydromethylphthalic anhydride(CAS: n/a)
Lead(CAS: 7439-92-1)
SCIP
e7ca4f32-0d25-4d06-afea-6dbc4a2e9566
Compatible products
Note: Applying some accessories below might limit this product.
