1. Home
  2. Products
  3. PLC-RPT- 48DC/21HC/MS - Relay Module

PLC-RPT- 48DC/21HC/MS - Relay Module
2910532

PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED and freewheeling diode, Push-in connection, 1 changeover contact, Bridge rectifier, Input voltage: 48 V DC

Product Details

Product type Relay Module
Product family PLC-INTERFACE
Application Palm switch
High continuous currents
Operating mode 100% operating factor
Mechanical service life 5x 106 cycles
Insulation characteristics
Insulation Safe isolation, reinforced insulation
Insulation characteristics
Insulation Safe isolation, reinforced insulation
Overvoltage category III
Pollution degree 2
Test voltage (Winding/contact) 4 kVrms (50 Hz, 1 min., winding/contact)
Rated insulation voltage 250 V AC
Rated surge voltage 6 kV
Coil side
Nominal input voltage UN 48 V DC
Input voltage range 40.3 V DC ... 60 V DC (20 °C)
Typical input current at UN 19 mA
Typical response time 6 ms
Typical release time 10 ms
Coil voltage 24 V DC
Protective circuit Bridge rectifier; Bridge rectifier
Operating voltage display Yellow LED
Switching
Contact type 1 changeover contact
Type of switch contact Single contact
Drive and function monostable
Drive (polarity) bipolar
Contact material AgNi
Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage 12 V (10 mA)
Limiting continuous current 10 A
Maximum inrush current 24 A (20 ms)
Min. switching current 10 mA (12 V)
Interrupting rating (ohmic load) max. 264 W (24 V DC)
62 W (48 V DC)
48 W (60 V DC)
52 W (110 V DC)
66 W (220 V DC)
2750 VA (250 V AC)
Switching capacity 1 A (24 V, DC13)
1.5 A (230 V, AC15)
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14
Width 14 mm
Height 80 mm
Depth 104 mm
Flammability rating according to UL 94 V0 (Housing)
Ambient conditions
Degree of protection Relay RT II (Relay)
IP20 (Relay base)
≥ IP54 (Installation location)
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude ≤ 2000 m
UL, USA
Identification UL 508
UL 508 Recognized
UL, USA / Canada
Identification UL 508
UL 508 Recognized
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Standards/regulations IEC 60947-5-1
Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any
Item number 2910532
Packing unit 1 pc
Minimum order quantity 10 pc
Note Made to Order (non-returnable)
Sales Key C05
Product Key CK623A
Catalog Page Page 369 (C-5-2019)
GTIN 4055626486833
Weight per Piece (including packing) 77.02 g
Weight per Piece (excluding packing) 64 g
Customs tariff number 85364190
Country of origin DE

ECLASS

ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601

ETIM

ETIM 8.0 EC001437

UNSPSC

UNSPSC 21.0 39122300
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products