PLC-2RPT-24DC/1 - Relay Module

PLC-INTERFACE with two independent relays, consisting of PLC-BPT.../21 basic terminal block with push-in connection and two integrated relays, power contact, for mounting on DIN rail NS 35/7,5, 2 x 1 N/O contact, input voltage 24 V DC

Product Details

Product type Relay Module
Product family PLC-INTERFACE
Application two integrated relays
Operating mode 100% operating factor
Mechanical service life 2x 107 cycles
Insulation characteristics
Insulation Basic insulation
Insulation characteristics: Air clearances and creepage distances between the power circuits
Insulation Basic insulation
Overvoltage category III
Pollution degree 2

Maximum power dissipation for nominal condition 0.17 W
Test voltage (Winding/contact) 3 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact) 3 kV AC (50 Hz, 1 min., contact/contact)
Air clearances and creepage distances between the power circuits
Rated insulation voltage 250 V AC
Rated surge voltage 4 kV

Coil side
Nominal input voltage UN 24 V DC
Input voltage range 18 V DC ... 33.6 V DC (20 °C)
Typical input current at UN 7 mA
Typical response time 4 ms
Typical release time 6 ms
Protective circuit Reverse polarity protection; Polarity protection diode
Surge protection; Freewheeling diode
Operating voltage display Yellow LED

Contact type 2 N/O contacts (2 relays with 1 N/O contact)
Type of switch contact Single contact
Note regarding the switch contact two integrated relays
Drive and function monostable
Contact material AgNi
Maximum switching voltage 250 V AC
30 V DC
Minimum switching voltage 24 V AC/DC
Limiting continuous current 3.5 A
Maximum inrush current 5 A
Min. switching current 5 mA
Interrupting rating (ohmic load) max. 84 W (at 24 V DC)
24 W (at 48 V DC)
24 W (at 60 V DC)
31 W (at 110 V DC)
46 W (at 220 V DC)
875 VA (for 250 V AC)

Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14

Width 6.2 mm
Height 80 mm
Depth 86 mm

Flammability rating according to UL 94 V0 (Housing)

Ambient conditions
Degree of protection Relay base IP20 (Relay base)
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -20 °C ... 60 °C

Certificate CE-compliant
Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive

Air clearances and creepage distances between the power circuits
Standards/regulations IEC 60664
EN 50178

Mounting type DIN rail mounting
Assembly instructions in rows with zero spacing
Mounting position any

Item number 2901639
Packing unit 1 pc
Minimum order quantity 10 pc
Sales Key C05
Product Key CK6235
Catalog Page Page 404 (C-5-2019)
GTIN 4046356620376
Weight per Piece (including packing) 34 g
Weight per Piece (excluding packing) 29.3 g
Customs tariff number 85364190
Country of origin DE


ECLASS-9.0 27371601
ECLASS-10.0.1 27371601
ECLASS-11.0 27371601
ECLASS-12.0 27371601
ECLASS-13.0 27371601


ETIM 8.0 EC001437


UNSPSC 21.0 39122300


Approval ID: TR_TS_D_00573_c

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products

Your advantages

Two switching channels in one 6.2 mm housing
100% higher channel density than conventional 6.2 mm relays
Integrated input circuit/protective circuit
Safe isolation according to DIN EN 50178 between coil and contacts and between contacts