Safety module - AXL SE SSDO4/2 2A
1190017

Axioline Smart Elements, Digital output module, Functional safety, SafetyBridge technology, Safe digital outputs: 4 (1-channel assignment), 2 (2-channel assignment), 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20

This product needs further products for operation. Mandatory Accessories
Free Download available. Downloads

Product Details


You can integrate Axioline Smart Elements into systems with the Smart Element interface. This Smart Element is a safe output module for use in a SafetyBridge system.



Dimensional drawing
Width 14.9 mm
Height 62.2 mm
Depth 62 mm

Smart Element interface
Number of interfaces 1
Connection method Card edge connector
Transmission speed See system in which you use the Smart Element.

Module
Input address area 5 Byte
Output address area 6 Byte

Digital
Output name Safe digital outputs
Output description EN 61131-2
Connection method Push-in connection
Connection technology 2-conductor
Number of outputs 2 (2-channel assignment)
4 (1-channel assignment)
Protective circuit Short-circuit protection, overload protection of the outputs; electronic
Output voltage 24 V DC
Output current max. 2 A (per output)
Maximum output current per channel 2 A
Maximum output current per module 4 A
Nominal output voltage 24 V DC
Output voltage when switched off < 5 V
Output current when switched off < 2 mA
Nominal load, inductive 48 VA (1 H; 12 Ω; at nominal voltage)
Nominal load, ohmic 48 W (12 Ω, at nominal voltage)
Switching frequency 1 Hz (0.2 Hz at > 1 A)
Reverse voltage resistance to short pulses no
Behavior with overload Switch-off of the relevant output, restart upon acknowledgment
Behavior with inductive overload Output can be destroyed

Type modular
Product type I/O component
Mounting position any
Application Functional safety
SafetyBridge technology
Operating mode SafetyBridge
Insulation characteristics
Overvoltage category II (IEC 60664-1)
Pollution degree 2 (EN 60664-1)

Potentials: Axioline F local bus supply (UBus)
Supply voltage 5 V DC (via bus base module)
Current draw max. 120 mA (at UBus 5 V DC)
typ. 93 mA (at UBus 5 V DC)
Potentials: Communications power supply of the Smart Elements (USE)
Supply voltage using card edge connectors
Potentials: I/O supply (UP)
Supply voltage 24 V DC (using card edge connectors)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 30 mA ((Supply from UP with 30 V DC, all outputs set, without supply to the actuators))
typ. 25 mA ((Supply from UP with 24 V DC, all outputs set, without supply to the actuators))
Current consumption min. 21 mA ((Supply from UP with 19.2 V DC, all outputs set, without supply to the actuators))
Power consumption max. 900 mW
min. 403 mW

Connection technology
Connection name I/O
Note on the connection method Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor connection
Connection method Push-in connection
Conductor cross section solid 0.25 mm² ... 1.5 mm²
Conductor cross section flexible 0.25 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Stripping length 8 mm
I/O
Connection method Push-in connection
Note on the connection method Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid 0.25 mm² ... 1.5 mm²
Conductor cross section, flexible 0.25 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Stripping length 8 mm

Ambient temperature (operation) -25 °C ... 60 °C
Degree of protection IP20
Degree of protection at installation location min. IP54
Air pressure (operation) 70 kPa ... 108 kPa
Air pressure (storage/transport) 66 kPa ... 108 kPa
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Air clearances and creepage distances
Air clearances and creepage distances IEC 60664-1

Mounting type Smart Element slot
Mounting position any

Item number 1190017
Packing unit 1 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Sales Key C18
Product Key DNA831
GTIN 4063151238285
Weight per Piece (including packing) 48.43 g
Weight per Piece (excluding packing) 36 g
Customs tariff number 85389091
Country of origin DE


ECLASS

ECLASS-9.0 27242604
ECLASS-10.0.1 27242604
ECLASS-11.0 27242604

ETIM

ETIM 8.0 EC001599

UNSPSC

UNSPSC 21.0 32151600

UL Listed

Approval ID: FILE E 238705

Functional Safety

Approval ID: 968/FSP 2449.00/22

Functional Safety

Approval ID: 968/FSP 2449.00/22

REACh SVHC Lead 7439-92-1

Your advantages

Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN 62061, SIL 3 in accordance with IEC 61508
4 safe outputs for 1-channel assignment
2 safe outputs for 2-channel assignment
24 V DC, 2 A