Safety module - AXL SE PSDI8/3
1079241

Axioline Smart Elements, Digital input module, Functional safety, Safe digital inputs: 8 (1-channel assignment), 4 (2-channel assignment), 24 V DC, connection technology: 3-conductor, degree of protection: IP20

This product needs further products for operation. Mandatory Accessories
Downloads

Product Details


You can integrate Axioline Smart Elements into systems with the Smart Element interface. This Smart Element is a safe input module for use in a PROFIsafe system.



Dimensional drawing
Width 14.9 mm
Height 62.2 mm
Depth 62 mm

Color zinc yellow RAL 1018

Smart Element interface
No. of channels 1
Connection method Card edge connector
Transmission speed See system in which you use the Smart Element.

Digital
Input name Safe digital inputs
Description of the input EN 61131-2, type 3
Number of inputs 8 (1-channel assignment)
4 (2-channel assignment)
Cable length max. 200 m (200 m from the clock output to the safe input (total based on forward and return path))
Connection method Push-in connection
Connection technology 3-conductor
Input voltage range "0" signal -3 V DC ... 5 V DC
Input voltage range "1" signal 11 V DC ... 30 V DC
Nominal input voltage UIN 24 V DC
Nominal input current at UIN typ. 2.7 mA
Input filter time 1.5 ms
3 ms (Default)
5 ms
15 ms
Protective circuit Polarity reversal protection of the inputs; Diode

Type modular
Product type I/O component
Mounting position any
Application Functional safety
Operating mode PROFIsafe 2.4, PROFIsafe 2.6.1
Insulation characteristics
Overvoltage category II (IEC 60664-1)
Pollution degree 2 (EN 60664-1)

Potentials
Protection external fusing via the system in which the Smart Element is used
Protective circuit Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Polarity reversal protection of the supply voltage; via the system in which the Smart Element is used
Potentials: Axioline F local bus supply (UBus)
Supply voltage 5 V DC (via bus base module)
Current draw max. 140 mA (at UBus 5 V DC)
typ. 101 mA (at UBus 5 V DC)
Potentials: Communications power supply of the Smart Elements (USE)
Supply voltage using card edge connectors
Current draw max. 144 mA (at USE 3.3 V DC)
typ. 92 mA (at USE 3.3 V DC)
Potentials: I/O supply (UP)
Supply voltage 24 V DC (using card edge connectors)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw max. 12 mA (Power supply from Up with 30 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
typ. 9 mA (Power supply from Up with 24 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Current consumption min. 8 mA (Power supply from Up with 19.2 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Power consumption max. 360 mW
Power consumption min. 154 mW

Connection technology
Connection name I/O
Note on the connection method Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor connection
Connection method Push-in connection
Conductor cross section solid 0.25 mm² ... 1.5 mm²
Conductor cross section flexible 0.25 mm² ... 1.5 mm²
Conductor cross section AWG 24 ... 16
Stripping length 8 mm
I/O
Connection method Push-in connection
Note on the connection method Note the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid 0.25 mm² ... 1.5 mm²
Stripping length 8 mm

Ambient temperature (operation) -25 °C ... 60 °C
Degree of protection IP20
Degree of protection at installation location min. IP54
Air pressure (operation) 70 kPa ... 108 kPa
Air pressure (storage/transport) 66 kPa ... 108 kPa
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)

Protection class III (IEC 61140, EN 61140, VDE 0140-1)

Mounting type Smart Element slot
Mounting position any

Item number 1079241
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C18
Product Key DNA821
GTIN 4055626798127
Weight per Piece (including packing) 58.8 g
Weight per Piece (excluding packing) 36 g
Customs tariff number 85389091
Country of origin DE


ECLASS

ECLASS-9.0 27242604
ECLASS-10.0.1 27242604
ECLASS-11.0 27242604

ETIM

ETIM 8.0 EC001599

UNSPSC

UNSPSC 21.0 32151600

UL Listed

Approval ID: FILE E 238705

cUL Listed

Approval ID: FILE E 238705

PROFIsafe

Approval ID: Z20276

Functional Safety

Approval ID: 968/EZ 650.04/20

Functional Safety

Approval ID: 968/EZ 650.04/20

cULus Listed


REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

Up to SIL 3 in accordance with EN 61508
Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with IEC 62061
8 safe inputs for 1-channel assignment
4 safe inputs for 2-channel assignment