Axioline E digital input device via IO-Link in plastic housing with an IO-Link A-port and eight inputs, 24 V DC, 4-conductor technology, M12 fast connection technology
The Axioline E digital input device is connected to an IO-Link master via an IO-Link A port. It is used to acquire digital signals via IO-Link. Use within different networks is possible via the IO-Link master.
| Dimensional drawing |
|
| Width | 60 mm |
| Height | 141 mm |
| Depth | 20 mm |
| Note on dimensions | The height is 170 mm including fixing clips. The depth is 30 mm including the connector. |
| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Housing material | Pocan® |
| Color | anthracite grey RAL 7016 |
| IO-Link | |
| Amount of process data | 16 bit (Input data) |
| Digital | |
| Input name | Digital inputs |
| Description of the input | EN 61131-2 types 1 and 3 |
| Number of inputs | 8 |
| Cable length | max. 30 m (to the sensor) |
| Connection method | M12 connector |
| Connection technology | 4-conductor |
| Input voltage range "0" signal | -3 V ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30 V DC |
| Nominal input voltage UIN | 24 V DC |
| Nominal input current at UIN | typ. 2.4 mA |
| Input filter time | 1 ms |
| Protective circuit | Overload protection, short-circuit protection of sensor supply |
| Polarity reversal protection of the inputs | |
| IO-Link | |
| Number of ports | 1 |
| Connection method | M12 connector, A-coded |
| Connection technology | 3-conductor |
| Port type | Class A |
| Type | Stand-Alone |
| Product type | I/O component |
| Product family | Axioline E |
| Supply: IO-Link | |
| Designation | IO-Link port supply (L+) |
| Nominal voltage for I/O supply | 24 V DC (Provided via the IO-Link interface of the IO-Link master.) |
| Nominal current per device | approx. 40 mA (15 mA no load + current consumption sensors) |
| Protective circuit | Reverse polarity protection; yes |
| Permissible cable length | max. 20 m |
| Supply: | |
| Designation | Power supply for sensors |
| Current consumption | max. 1.28 A (per port) |
| max. 1.28 A (Device dependent; observe the current of the IO-Link master that is made available via L+.) | |
| Connection method | M12 connector |
| Note on the connection method | in accordance with IEC 61076-2-101, M12 fast connection technology (SPEEDCON) |
| Ambient conditions | |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Degree of protection | IP65/IP67 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Permissible humidity (operation) | 5 % ... 95 % |
| Permissible humidity (storage/transport) | 5 % ... 95 % |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Mounting type | Wall mounting |
| Nominal Voltage UN | Nominal Current IN | Cross Section AWG | Cross Section mm2 | |
|---|---|---|---|---|
| 125 V | 1 A |
| Nominal Voltage UN | Nominal Current IN | Cross Section AWG | Cross Section mm2 | |
|---|---|---|---|---|
| 125 V | 1 A |