ELR H3-SC- 24DC/500AC-9 - Hybrid motor starter

2900530

Hybrid motor starter for starting 3~ AC motors up to 500 V AC and 9 A output current, with 24 V DC control voltage and screw connection.

Item number	2900530
Packing unit	1 pc
Minimum order quantity	1 pc
Sales Key	C470
Product Key	CK7423
Catalog Page	Page 35 (C-5-2019)
GTIN	4046356526012
Weight per Piece (including packing)	217.5 g
Weight per Piece (excluding packing)	159.05 g
Customs tariff number	85371098
Country of origin	DE



IECEE CB Scheme

Approval ID: DE1-55728



EAC

Approval ID: RU*C-DE.*08.B.00520*



UL Listed

Approval ID: FILE E 323771



CCC

Approval ID: 2016010304871315



cUL Listed

Approval ID: FILE E 323771



cUL Listed

Approval ID: FILE E 228652



UL Listed

Approval ID: FILE E 228652

Product type	Hybrid motor starters
Product family	CONTACTRON
Operating mode	100% operating factor

Number of phases	3
Motor starter type	Direct starter
Maximum power dissipation for nominal condition	13.5 W
Switching frequency	≤ 2 Hz (Load-dependent)
Maximum power dissipation	14.6 W
Minimum power dissipation	1.1 W
Coordination type	1
Supply
Rated control circuit supply voltage U_S	24 V DC
Control supply voltage range	19.2 V DC ... 30 V DC
Rated control supply current I_S	40 mA
Protective circuit	Surge protection
Protective circuit		Reverse polarity protection
Insulation characteristics
Rated insulation voltage	500 V
Rated surge voltage	6 kV
Overvoltage category	III
Degree of pollution	2
Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit	Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC
		Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC

Control
Input name	Control input
Rated actuating voltage U_C	24 V DC
Triggering voltage range	19.2 V DC ... 30 V DC
Rated actuating current I_C	5 mA (Input type 1)
Switching threshold	9.6 V (“0” signal)
Switching threshold		19.2 V (“1” signal)
Typical turn-off time	< 30 ms
Protective circuit	Reverse polarity protection

AC output
Rated operating voltage U_e	500 V AC
Operating voltage range	42 V AC ... 550 V AC
Rated operating current I_e	9 A (AC-51)
Rated operating current I_e		6.5 A (AC-53a)
Mains frequency	50/60 Hz
Load current range	0 A ... 9 A (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2	-
Leakage current	0 mA
Protective circuit	Surge protection

Control circuits
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.
Load circuit
Connection method	Screw connection
Stripping length	8 mm
Screw thread	M3
Conductor cross section rigid	0.2 mm² ... 2.5 mm²
Conductor cross section flexible	0.2 mm² ... 2.5 mm²
Conductor cross section AWG	24 ... 14
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque		5 lb_f-in. ... 7 lb_f-in.

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H3-SC- 24DC/500AC-9 - Hybrid motor starter

2900530

Product Details

ECLASS

ETIM

UNSPSC

IECEE CB Scheme

EAC

UL Listed

CCC

cUL Listed

cUL Listed

UL Listed

Compatible Products

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)	-40 °C ... 80 °C
Altitude	≤ 2000 m

UKCA
Certificate	UKCA-compliant
UL approval
Certificate	NLDX.E228652
UL data
SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
SCCR		5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
FLA	6.5 A (500 V AC)
Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
Group installation		30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
Category code	NLDX / NRNT

Standards/regulations
Standards/regulations	IEC 60947-1
		IEC 60947-4-2
		IEC 61508
		ISO 13849

Mounting type	DIN rail mounting
Assembly instructions	alignable, for spacing see derating
Mounting position	vertical (horizontal DIN rail, motor output below)


REACh SVHC	Lead 7439-92-1

China RoHS	Environmentally Friendly Use Period = 50 years
		For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Status display	Yellow LED
Operating voltage display	Green LED

Width	22.5 mm
Height	107 mm
Depth	114 mm

ECLASS-11.0	27370905
ECLASS-12.0	27370905
ECLASS-13.0	27370905

Automate

Connect

Mark, assemble, and install

Supply, charge, and protect

Switch, Measure and Monitor

ELR H3-SC- 24DC/500AC-9 - Hybrid motor starter 2900530

Product Details

ECLASS

ETIM

UNSPSC

Compatible Products

US-EMLP (15X5) - Plastic label 0828790

UC-EMLP (15X5) - Plastic label 0819301

EM-CPS-225 - Power distribution board 1002634

EM-CPS-405 - Power distribution board 1002635

EM-CPS-TB3/63A - Connection module 1002633

EM-CPS-DA-22,5F/16A - Adapter 1002668

BRIDGE- 2 - Bridge 2900746

BRIDGE- 3 - Bridge 2900747

BRIDGE- 4 - Bridge 2900748

BRIDGE- 5 - Bridge 2900749

BRIDGE- 6 - Bridge 2900750

BRIDGE- 7 - Bridge 2900751

BRIDGE- 8 - Bridge 2900752

BRIDGE- 9 - Bridge 2900753

BRIDGE-10 - Bridge 2900754

BRIDGE- 2-1M - Bridge 2901542

BRIDGE- 3-1M - Bridge 2901655

BRIDGE- 4-1M - Bridge 2901658

BRIDGE- 5-1M - Bridge 2901544

BRIDGE- 6-1M - Bridge 2901649

BRIDGE- 2-3M - Bridge 2901543

BRIDGE- 3-3M - Bridge 2901656

BRIDGE- 4-3M - Bridge 2901659

BRIDGE- 5-3M - Bridge 2901545

BRIDGE- 6-3M - Bridge 2901697

BRIDGE- 7-3M - Bridge 2901698

BRIDGE- 8-3M - Bridge 2901700

BRIDGE- 9-3M - Bridge 2901701

BRIDGE-10-3M - Bridge 2901702

BRIDGE- 2- 2M/0,3M - Bridge 2909897

BRIDGE- 3- 2M/0,3M - Bridge 2909898

BRIDGE- 4- 2M/0,3M - Bridge 2909899

BRIDGE COVER - Covering hood 2906240

ELR H3-SC- 24DC/500AC-9 - Hybrid motor starter

2900530