VIP power cabling, universal front adapter for connecting all common 20-pos. SIMATIC S7-300 I/O modules, via two cables each with a 10-pos. COMBI connector, pitch: 3.5 mm
Product details
Product type
Front adapter
Insulation characteristics
Overvoltage category
III
Operating voltage (AC/DC)
≤ 250 V AC/DC
Nominal operating mode
100% operating factor
Current (per single-core wire, 40°C)
≤ 6 A
Current (per single-core wire, 60°C)
≤ 4 A
Current (Total current per cable, 40°C)
≤ 20 A
Current (Total current per cable, 60°C)
≤ 16 A
Rated insulation voltage
260 V
Rated surge voltage
4 kV (Basic insulation)
Supported controller SIEMENS S7-300 / ET 200 M
Suitable I/O card
6ES7321-1BH02-0AA0
6ES7321-1BH10-0AA0
6ES7321-7BH01-0AB0
6ES7321-1BH50-0AA0
6ES7321-1CH20-0AA0
6ES7321-1FH00-0AA0
6ES7321-1FF01-0AA0
6ES7322-1FL00-0AA0
6ES7322-1BH01-0AA0
6ES7322-1BH10-0AA0
6ES7322-1FH00-0AA0
6ES7322-1BF01-0AA0
6ES7322-8BF00-0AB0
6ES7322-1CF00-0AA0
6ES7322-1FF01-0AA0
6ES7322-1HH01-0AA0
6ES7322-1HF01-0AA0
6ES7323-1BH01-0AA0
6ES7327-1BH00-0AB0
6ES7331-7HF01-0AB0
6ES7331-7KF02-0AB0
6ES7331-7KB02-0AB0
6ES7332-7ND02-0AB0
6ES7332-5HD01-0AB0
6ES7332-5HB01-0AB0
6ES7334-0CE01-0AA0
6ES7334-0KE00-0AB0
6ES7331-7TF01-0AB0
6ES7332-8TF01-0AB0
6ES7336-4GE00-0AB0
Controller level
Connection method
Plug-in connection
Note
Can be plugged onto 20-pos. I/O modules
Field level
Connection method
COMBICON connectors
Number of connections
2
Number of positions
10
Pitch
3.5 mm
Cable
Length
8 m
Number of positions
10
Shielded
no
Conductor type
Round cable set
Conductor structure signal line
16x 1.80 mm
AWG signal line
21
Conductor cross section
10x 0.5 mm²
Outer sheath, material
PVC
External sheath, color
gray
Conductor material
Bare Cu litz wires
Cable resistance
≤ 40 Ω/km
Insulation resistance
≥ 20 MΩ*km
Halogen-free
no
Flame resistance
UL VW-1
Ambient conditions
Degree of protection
IP20
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-20 °C ... 80 °C
Standards/regulations
DIN EN 50178
IEC 60664
Mounting position
any
Notes on operation
For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
