ECP 6 - Electronic circuit breaker - 0912033

Notes

General	When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80 % due to the thermal effect during continuous operation (100 % operating factor). Parallel connection of multiple load outputs is not permitted.

Product properties

Product type	Device circuit breakers
Product family	ECP
Type	Male
Number of positions	1
Number of rows	1
No. of channels	1
Insulation characteristics
Overvoltage category	II
Degree of pollution	2

Electrical properties

Fuse type	Automatic device
Switch-on delay	300.00 ms
Short-circuit current	Active current limitation, max. 1.8 x I_N
Service life electrical	10000 cycles in the case of 1 x I_N
Switching capacity I_CN	Active current limitation
Fuse	electronic
General
Operating voltage	24 V DC
Operating voltage		18 V DC ... 32 V DC
Nominal current I_N	6 A
Rated surge voltage	0.5 kV
Tripping method	E (electronic)
Required backup fuse	not required, integrated failsafe element
Dielectric strength	1000 V AC (Actuation area)
		500 V AC (Installation area)
		500 V AC (Load circuit signal contact)
Switch off	typ. 1.8 x I_N
Active current limitation	active
Fuse	electronic
Closed circuit current I₀	typ. 13 mA
Voltage drop	280 mV (at I_N)
Contact switching type	With electrical isolation
Load circuit
Shutdown time	typ. 5 s (for electrical insulation when I_Load > 1.1 x I_N)
Max. capacitive load	20000 µF
Switch-on delay	typ. 0.3 s
Auxiliary contact
Contact connection type	floating signal contact
Minimum operating voltage U_min DC	10 V DC
Maximum operating voltage U_max DC	30 V DC
Minimum operating current I_min	10 mA
Max. operating current I_max	0.5 A

Dimensions

Material specifications

Flammability rating according to UL 94	V0
Insulating material group	IIIa
Insulating material	PPS

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP30 (Actuation area)
Ambient temperature (operation)	0 °C ... 50 °C (non-condensing)
Ambient temperature (storage/transport)	-20 °C ... 70 °C
Humidity test	96 h, 95 % RH, 40 °C

Mounting

Item number	0912033
Packing unit	1 pc
Note	Made to order (non-returnable)
Sales key	CL04
Product key	CLA132
Catalog page	Page 325 (C-4-2017)
GTIN	4046356092050
Weight per piece (including packing)	75.14 g
Weight per piece (excluding packing)	69.6 g
Customs tariff number	85362010
Country of origin	DE

EU RoHS
Fulfills EU RoHS substance requirements	Yes
Exemption	6(c), 7(a)
China RoHS
Environment friendly use period (EFUP)	EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
EU REACH SVHC
REACH candidate substance (CAS No.)	Lead (CAS: 7439-92-1)

ECP 6 - Electronic circuit breaker

0912033