Current transducers - MCR-S-1-5-UI-SW-DCI-NC
2814731

MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted currents, with relay and transistor output, input current 0 ... 0.2 A to 0 ... 11 A, unconfigured

Free Download available. Downloads

Product Details




Utilization restriction
EMC note EMC: class A product, see manufacturer's declaration in the download area

Product type Current transducer
Insulation characteristics
Overvoltage category III
Pollution degree 2

Total error ≤ 1.5 % (Temperature range)
Maximum power dissipation for nominal condition 2.2 W
Measuring category III
Test voltage output/power supply 500 V AC (50 Hz, 60 s)
Test voltage input/output 4 kV AC (50 Hz, 60 s)
Test voltage input/power supply 4 kV AC (50 Hz, 60 s)
Protective circuit Surge protection; 33 V suppressor diode
Step response (10-90%) 330 ms (AC)
40 ms (DC)
Temperature coefficient, typical < 0.025 %/K
Maximum transmission error < 0.5 % (of nominal range value under nominal conditions)
Rated insulation voltage 300 V AC (to earth)
Supply
Supply voltage range 20 V DC ... 30 V DC
Max. current consumption < 50 mA (without load)

Signal
Supply voltage 24 V DC
Measurement
Number of inputs 3
Configurable/programmable Yes, unconfigured
Input current range 0 A AC/DC ... 11 A AC/DC (Permitted continuous overload: 120%)
Current measuring range 0 A AC/DC ... 1 A AC/DC
0 A AC/DC ... 5 A AC/DC
0 A AC/DC ... 10 A AC/DC
Setting range for min. input current 0 mA AC/DC ... 200 mA AC/DC
Setting range for max. input current 0 A AC/DC ... 11 A AC/DC
Overload capacity 2 x IN (continuous)
Surge strength 20 x IN (1 s)
Frequency measuring range 15 Hz ... 400 Hz
Connection method Screw connection
Curve type AC, DC or distorted currents
Operate threshold 2 % (of measuring range nominal value 1/5/10 A)

Switching:
Contact type 1 changeover contact
Contact material AgSnO, hard gold-plated
Maximum switching voltage 30 V AC
36 V DC
250 V AC (when the gold layer is destroyed)
Limiting continuous current 50 mA
2 A (when the gold layer is destroyed)
Switching:
Continuous load current 80 mA (Not short-circuit proof)
Output voltage range 19 V ... 29 V (supply voltage - 1 V)
Setting range of the threshold value 1 % ... 110 %
Setting range of the response delay 0.1 s ... 20 s
Status display Yellow LED
Signal: Voltage/current
Output name Voltage output / current output
Configurable/programmable Yes, unconfigured
Voltage output signal 0 V ... 5 V
1 V ... 5 V
0 V ... 10 V
2 V ... 10 V
-5 V ... 5 V
-10 V ... 10 V
10 V ... 0 V
10 V ... 2 V
10 V ... -10 V
5 V ... 0 V
5 V ... 1 V
5 V ... -5 V
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Load/output load voltage output > 10 kΩ
Load/output load current output < 500 Ω

Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 14

Status display Green LED

Dimensional drawing
Width 22.5 mm
Height 99 mm
Depth 114.5 mm

Housing material Polyamide PA non-reinforced

Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Altitude < 2000 m
Permissible humidity (operation) 10 % ... 95 % (non-condensing)

CE
Certificate CE-compliant
UL, USA / Canada
Identification Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
Class I, Div. 2, Groups A, B, C and D or Non-Hazardous Locations Only

Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2

Standards/regulations IEC 61010-2-030

Mounting type DIN rail mounting
Mounting position any

Item number 2814731
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key C04
Product Key CK4A33
Catalog Page Page 230 (C-5-2019)
GTIN 4017918169282
Weight per Piece (including packing) 203.9 g
Weight per Piece (excluding packing) 149.08 g
Customs tariff number 85437090
Country of origin DE


ECLASS

ECLASS-9.0 27210123
ECLASS-10.0.1 27210123
ECLASS-11.0 27210123

ETIM

ETIM 8.0 EC002475

UNSPSC

UNSPSC 21.0 39121000

cUL Recognized

Approval ID: FILE E 238705

UL Recognized

Approval ID: FILE E 238705

EAC

Approval ID: RU*DE.*08.B.01852-19

cUL Listed

Approval ID: FILE E 199827

UL Listed

Approval ID: FILE E 199827

cULus Recognized

cULus Listed


REACh SVHC Lead 7439-92-1
Hexahydromethylphthalic anhydride
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products

Your advantages

Device can be set via DIP switches or MCR/PI-CONF-WIN configuration software
3-way isolation
True r.m.s. value measurement