Termination board for Yokogawa ADV 151, ADV 161, ADV 551 and ADV 561 I/O modules with a fuse for cable protection (5 x 20) and fuse failure display (LED) per channel. Redundant system connection.
Product details
Product type
Interface module
No. of channels
32
Operating mode
100% operating factor
Insulation characteristics
Insulation
Functional insulation
Overvoltage category
II
Pollution degree
2
Nominal voltage UN
24 V DC
19.2 V DC ... 26.4 V DC
Max. current carrying capacity per branch
100 mA (observe derating)
Max. total current of all branches
4 A (observe derating)
Rated insulation voltage
50 V DC
Rated surge voltage
0.5 kV
Supported controller YOKOGAWA CS3000 CentumVP
Suitable I/O card
ADV151
ADV161
ADV551
ADV561
Supported controller YOKOGAWA STARDOM
Suitable I/O card
NFDV151
NFDV161
NFDV551
NFDV561
Contact switching type
1 N/O contact
Type of switch contact
Double contact
Contact material
AgNi, 5 µm hard gold-plated
Maximum switching voltage
< 25 V AC
48 V DC
Limiting continuous current
1 A
Min. switching current
1 mA
Interrupting rating (ohmic load) max.
24 W (24 V DC)
48 W (48 V DC)
25 VA (25 V AC)
Mechanical service life
approx. 2x 107 cycles
Field level
Connection method
Spring-cage connection
Conductor cross-section rigid
0.2 m² ... 4 mm²
Conductor cross-section flexible
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
24 ... 12
Controller level
Connection method
Yokogawa, KS compatible
Number of connections
2
Number of positions
50
Note
Usable system cables: Phoenix Contact YUC50, Yokogawa AKB331
Tightening torque
0.5 Nm
Status display
LED (red)
Status display present
yes, if the fuse fails
Operating voltage display
Green LED
Item dimensions
Width
343.4 mm
Height
125.4 mm
Depth
70.8 mm
Ambient conditions
Degree of protection
IP00
Ambient temperature (operation)
-20 °C ... 50 °C
Ambient temperature (storage/transport)
-20 °C ... 70 °C
Altitude
≤ 2000 m
Standards/regulations
EN IEC 60664-1
Mounting type
DIN rail mounting
Assembly note
in rows with zero spacing
Mounting position
any
Notes on operation
Voltage monitoring on the module does not work in combination with upstream HESILED fuse terminal blocks with integrated LED display.
Notes on operation
Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Notes on operation
No additional touch protection is required when using a SELV/PELV voltage (≤ 25 V AC or 60 V DC).
Notes on operation
Against adjacent modules in the support rail direction at least one functional insulation on the output-side is complied with. If the application has higher requirements on the insulation (basic insulation or reinforced insulation), then these must be realized through suitable measures (e. g. partition plates).
Notes on operation
For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Item number
2321813
Packing unit
1 pc
Minimum order quantity
1 pc
Note
Made to order (non-returnable)
Sales key
C421
Product key
DK218N
GTIN
4046356340595
Weight per piece (including packing)
805.6 g
Weight per piece (excluding packing)
797 g
Customs tariff number
85369010
Country of origin
DE
ECLASS
ECLASS-13.0
27141152
ECLASS-15.0
27141152
ETIM
ETIM 9.0
EC002780
UNSPSC
UNSPSC 21.0
39121400
EU RoHS
Fulfills EU RoHS substance requirements
Yes
Exemption
6(c), 7(a), 7(c)-I
China RoHS
Environment friendly use period (EFUP)
EFUP-50
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
