HEAVYCON socket insert, for 830 V (III/3), with 10 N/O contacts and 2 switch contacts, crimp connection
| General | For HEAVYCON-ADVANCE housing of B24 type and HEAVYCON housing of HV10 type, crimp contacts CK 2,5-ED (crimp contacts not included in scope of supply) |
| General | Connectors may be operated only when there is no load/voltage. |
| Type | B24 |
| B48 | |
| Product type | Contact insert with a fixed no. of positions |
| Number of positions | 12 |
| Connection profile | 10+2+PE |
| Application | Power |
| Number of connections per position | 1 |
| No. of power contacts | 10 |
| No. of control contacts | 2 |
| Contact type | turned |
| Series | HC-HV |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection technology | Crimp connection |
| Number of connections per position | 1 |
| Conductor connection | |
| Conductor cross section | 0.5 mm² ... 4 mm² (power contacts) |
| 0.5 mm² ... 4 mm² (control contacts) | |
| Connection cross section AWG | 20 ... 12 (power contacts) |
| 20 ... 12 (control contacts) | |
| Stripping length of the individual wire | 7.5 mm (Power contact) |
| 7.5 mm (control contact) | |
| Dimensional drawing |
|
| Width | 34 mm |
| Height | 34.6 mm |
| Length | 111 mm |
| Drill hole distance, horizontal | 104 mm |
| Drill hole distance, vertical | 27 mm |
| Mechanical characteristics | |
| Contact diameter | 2.5 mm |
| Rated voltage (III/3) | 830 V (power contacts) |
| 500 V (control contacts) | |
| Rated surge voltage | 8 kV (power contacts) |
| 6 kV (control contacts) | |
| Rated current | 16 A (power contacts) |
| 16 A (control contacts) |
| Flammability rating according to UL 94 | V0 |
| Contact material | Copper alloy |
| Contact surface material | Ag (alternatively Au) |
| Contact carrier material | PC |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Insertion/withdrawal cycles | ≥ 500 |
| Cable structure | |
| Stripping length of the individual wire | 7.5 mm (Power contact) |
| 7.5 mm (control contact) | |
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
| Testing | |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Nominal Voltage UN | Nominal Current IN | Cross Section AWG | Cross Section mm2 | |
|---|---|---|---|---|
| 600 V | 20 A | 20 - 12 |
| Nominal Voltage UN | Nominal Current IN | Cross Section AWG | Cross Section mm2 | |
|---|---|---|---|---|
| 600 V | 16 A | - 12 |