Hybrid flush-type socket, Ethernet, 8-pos., M12 SPEEDCON, with straight solder connection
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Product type | Contact insert |
| Number of positions | 8 |
| Shielded | yes |
| Coding | Y - hybrid |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | > 100 MΩ |
| Nominal voltage UN | 48 V AC (Power and data) |
| 50 V DC (Power and data) | |
| Nominal current IN | 0.5 A (Data) |
| 6 A (Power) | |
| Transmission medium | Copper |
| Signal type/category | Ethernet CAT5 (IEC 11801:2002) |
| Dimensional drawing |
|
| Length of the solder pin | 2.3 mm |
| 2.3 mm |
| Material | Zinc die-cast (nickel-plated) |
| Flammability rating according to UL 94 | V0 |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PPA |
| Insertion/withdrawal cycles | > 100 |
| Header 1 | |
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | Y - hybrid |
| Cable structure | |
| Signal type/category | Ethernet CAT5 (IEC 11801:2002) |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP67 (correctly plugged in and locked) |
| Degree of protection | IP67 (correctly plugged in and locked) |
| Degree of protection | IP67, when plugged in |
| Ambient temperature (operation) | -40 °C ... 90 °C (Plug / socket) |
| Mounting type | Rear mounting |
| Type of packaging | Blister |