1. Home
  2. Products
  3. Connectors and cables
  4. Circular connectors
  5. Cable connector - ST-17S1N8A8005
Connector pin assignment
I = current strength, ϑ = ambient temperature, 17x 3.6 A

Cable connector - ST-17S1N8A8005
1624531

Cable connector, straight, Screw locking, M17, number of positions: 17, type of contact: Socket, shielded: yes, degree of protection: IP67, cable diameter range: 10 mm ... 12.5 mm, number of positions: 17, connection method: Crimp connection, series: ST

Product Details

Order information: Order crimp contacts Ø 0.6 mm separately
Safety note
Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product type Circular connector (cable-side)
Number of positions 17
Connection profile 17
Application Feedback, signal
Signal
Locking type Screw locking
Series ST
Shielded yes
Coding N
Thread type M17
Degree of protection IP67
Ambient temperature (operation) -40 °C ... 125 °C
Altitude 3000 m
Type straight
Direction of rotation Standard
Connection 1
Head design Socket
Contact
Contact diameter 0.6 mm
Max. current 3.6 A
Nominal voltage UN 48 V AC 74 V DC
Overvoltage category III
Rated surge voltage 1.5 kV
Seal material FPM
Housing material Metal
Conductor connection
Connection method Crimp connection
Cable structure
External cable diameter 10 mm ... 12.5 mm
Item number 1624531
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key A12
Product Key ABRBBA
Catalog Page Page 66 (C-2-2019)
GTIN 4046356622424
Weight per Piece (including packing) 60 g
Weight per Piece (excluding packing) 60 g
Customs tariff number 85366990
Country of origin DE

ECLASS

ECLASS-9.0 27440102
ECLASS-10.0.1 27440102
ECLASS-11.0 27440102

ETIM

ETIM 8.0 EC002635

UNSPSC

UNSPSC 21.0 39121400

cUL Recognized

Approval ID: FILE E 335019
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
48 V 1 A - 26

UL Recognized

Approval ID: FILE E 335019
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
48 V 1 A - 26

EAC

Approval ID: B.01687

UL Recognized

Approval ID: E153698-20140124
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
48 V 1 A

cUL Recognized

Approval ID: E153698-20140124
Approval Specification Data
Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2
48 V 1 A
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Compatible Products

Your advantages

Consistent EMC protection for reliable connection solutions in the industrial environment
Crimping connection: vibration- and temperature-resistant assembly
Flexible use: reliably connect various cable diameters
Molded designs with pre-assembled cables on one or both sides