EAC
Approval ID: RU C-DE.BL08.B.00511cULus Recognized
Approval ID: E468743| Nominal voltage UN | Nominal current IN | Cross section AWG | Cross section mm2 | |
|---|---|---|---|---|
| 600 V | 13 A | - 14 |
SACC-M12MSK-4PECT-CL SH
-
Power connector
1027474
Power connector, Power, 5-position, shielded, Plug straight M12, coding: K, Crimp connection, knurl material: Zinc die-cast, tin-plated, external cable diameter 8 mm ... 13 mm, without crimp contacts
This product needs further products for operation.
Mandatory accessories
Product details
| General | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| Connection method | Crimp connection |
| Product type | Circular connector (cable-side) |
| Sensor type | Power |
| Number of positions | 5 |
| Application | Power supply |
| No. of cable outlets | 1 |
| Shielded | yes |
| Coding | K |
| Cable outlet | straight |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Dimensional drawing |
|
| Length | 58 mm |
| External dimensions | |
| Outside diameter | 8 mm ... 13 mm |
| Housing | |
| Diameter housing | 21.5 mm |
| Flammability rating according to UL 94 | V0 |
| Material of grip body | Zinc die-cast, nickel-plated |
| Contact carrier material | PA |
| Material for screw connection | Zinc die-cast, tin-plated |
| Conductor connection | |
| Connection method | Crimp connection |
| Connection cross section | 1.5 mm² ... 2.5 mm² (flexible) |
| Connection cross section AWG | 14 (flexible) |
| Tightening torque | 5 Nm (Pressure nut with coupling sleeve) |
| Pin assignment | |
| Contact | Color (signal designation) | Contact (optional) | 1 = BK |
| 2 = BK | |
| 3 = BK | |
| 4 = BK | |
| PE = GNYE | |
| Rated surge voltage | 6 kV |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 690 V AC |
| Nominal current IN | 16 A (when using 2.5 mm² conductors) |
| 16 A (at 40 °C) |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection 1 | |
| Head design | Plug |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | K |
| Signal type/category | Power |
| Ambient conditions | |
| Degree of protection | IP65 |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Standard designation | M12 connector |
| Standards/specifications | based on IEC 61076-2-111 |
Your advantages
Extremely compact, thanks to the small wiring space and high contact density
Safely shielded: reliable shield connection even under extreme mechanical strain
Robust connection: suitable for railway applications with high shock and vibration loads
High-performance: AC connectors for up to 16 A and 690 V AC
Protection against mismatching, thanks to special K-coding