1. Home
  2. Products
  3. Connectors and cables
  4. Circular connectors
  5. Cable connector - M23-7EP198A8L25S
Technical drawings can be found under Downloads
I = current strength, T = ambient temperature

Cable connector - M23-7EP198A8L25S
1628848

Cable connector, M23 PRO, straight long, shielded: yes, ONECLICK fast locking system, M23, No. of pos.: 4+3+PE, type of contact: Pin, Crimp connection, cable diameter range: 14 mm ... 17 mm

Product Details

Order information: Order crimp contacts 4 x Ø 1 mm, 4 x Ø 2 mm separately
Notes on operation Please observe the derating curve.
Safety note
Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product type Circular connector (cable-side)
Ambient temperature (operation) -40 °C ... 105 °C (see to derating)
Permanent temperature 125 °C (DIN EN 60512-9-2 / 1000 h)
Application Power
Number of positions 8
Connection profile 4+3+PE
Insertion/withdrawal cycles 100
Contact diameter 2 mm
Item number 1628848
Packing unit 1 pc
Minimum order quantity 1 pc
Sales Key A12
Product Key ABRCIH
Catalog Page Page 146 (C-2-2019)
GTIN 4055626619002
Weight per Piece (including packing) 154.25 g
Weight per Piece (excluding packing) 154.25 g
Customs tariff number 85366990
Country of origin DE

ECLASS

ECLASS-9.0 27440102
ECLASS-10.0.1 27440102
ECLASS-11.0 27440102

ETIM

ETIM 8.0 EC002635

UNSPSC

UNSPSC 21.0

UL Listed

Approval ID: E468743-20190627

cUL Listed

Approval ID: E468743-20190627

cULus Listed

China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Compatible Products

  1. Torque screwdriver SF-Z0028 - 1607456

  2. Crimp contact SF-20KP011 - 1050147

  3. Hook wrench SF-Z0027 - 1607455

  4. Crimp contact SF-20KP012 - 1050205

  5. Crimp contact SF-20KP013 - 1050210

  6. Crimp contact ST-10KP010 - 1618255

  7. Crimp contact ST-10KP035 - 1618458

  8. Plastic protective cap PROT-M23PRO-PW-IT-IP20 - 1055746

Your advantages

Solutions with cross-manufacturer compatibility for standard and fast locking systems
ONECLICK fast locking system with an optically, haptically, and acoustically clear locking position
Reliable under the harshest conditions: cable connectors with vibration brake
Modern, consistent design for highly convenient operation
Easy, cost-effective cable assembly: uniform shielding of M17 to M40