1. Home
  2. Products
  3. Set - EV-SET-T2AC-BAS-RCM1-20ASE12
Connection drawing:
1. RCM, 2. Charging controller, 3. Charging contactor, 4. RCM sensor coil, 5. Infrastructure socket outlet

Set - EV-SET-T2AC-BAS-RCM1-20ASE12
1628080

CHARX start home, Starter kit for easy assembly of a charging station, Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet, IEC 62196-2, IEC 61851-1, Mode 3, Case B, 11 kW, 16 A, 400 V AC, cable: 0.7 m

Product Details

HOME charging technology set with AC Infrastructure Socket Outlet, with sample assembly and installation instructions for a charging station for E-Mobility (EVSE), including recommendations for further components required (charging contactor, safety equipment), for charging electric vehicles (EV) with alternating current (AC) via Type 2 Vehicle Inlets

General Set of all Phoenix Contact charging technology products and terminal blocks with recommendations for further components required (charging contactor, safety equipment)
General The installation and startup of this device may only be performed by an electrically skilled person. Observe the applicable national standards and regulations.
General The individual components bear a CE marking if legally required.
Product type Charging technology set
Set consists of 1405213 EV-T2M3SE12-3AC20A-0,7M2,5E10
1405217 EV-T2SC
1622452 EV-CC-AC1-M3-CBC-SER-HS
1622450 EV-RCM-C1-AC30-DC6
3208760 PT 16-TWIN N
3208773 PT 16-TWIN N BU
3208786 PT 16-TWIN N-PE
3211813 PT 6
3211819 PT 6 BU
3211822 PT 6-PE
3209510 PT 2,5
3209549 PT 2,5-TWIN
3209552 PT 2,5-TWIN BU
3025040 ZFK 6-DREHSI (5X20)
3005950 FBS 2-12
3030174 FBS 3-5
3030417 D-ST 2,5
3030488 D-ST 2,5-TWIN
3212044 D-PT 6
3208799 D-PT 16-TWIN N
3022276 CLIPFIX 35-5
Application for easy assembly of a charging station
Type Starter kit
Charging standard Type 2
Charging mode Mode 3, Case B
Controller type Basic AC charging controller, preconfigured
Type of charging point AC infrastructure socket outlet, 12 V locking actuator, self-closing IP54 protective cover
Type of charging current AC 3-phase
Module for real power measurement 1-channel RCM
Charging voltage 400 V AC
Charge current 16 A
Capacity 11 kW
Wiring diagram Including download of sample E-Plan
Locking release in the event of mains failure Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Charging controllers
Number of charging points 1
Cable length 0.70 m
Cable structure
Cable type Single wires
Standards
Standards/regulations IEC 62196-2
IEC 61851-1
Item number 1628080
Packing unit 1 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Product Key XWBCDA
Catalog Page Page 70 (C-7-2019)
GTIN 4055626379074
Weight per Piece (including packing) 2,981 g
Weight per Piece (excluding packing) 2,981 g
Customs tariff number 85366990
Country of origin DE

ECLASS

ECLASS-9.0 27144792
ECLASS-10.0.1 27144792

ETIM

ETIM 7.0 EC002884

UNSPSC

UNSPSC 21.0 39121522
China RoHS Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

Your advantages

Set of all Phoenix Contact charging technology products and terminal blocks with recommendations for further components required (charging contactor, safety equipment)
Convenient ordering, thanks to just one order number for the set, saving you the job of putting together matching components
Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
Safe use, thanks to verified instructions regarding compatible components
Stand-alone and simple setup of an AC charging station without additional development effort based on a wiring diagram
Flexible application options, thanks to comprehensive configuration options and various communication interfaces for the charging controller