Retainer for Vehicle Connector as parking position at charging stations for E-Mobility (EVSE)
CHARX connect, Charging connector holder, for vehicle charging connectors on charging stations (EVSE), Combined Charging System, CCS type 2, IEC 62196-3, Front mounting, Item is not compatible with the HPC CCS type 2 charging cable from Phoenix Contact.
Retainer for Vehicle Connector as parking position at charging stations for E-Mobility (EVSE)
| Note on application | Item is not compatible with the HPC CCS type 2 charging cable from Phoenix Contact. |
| Product type | Charging connector holder |
| Application | for vehicle charging connectors on charging stations (EVSE) |
| Combined Charging System | |
| Charging standard | CCS type 2 |
| Charging mode | Mode 4 |
| Type of charging current | DC |
| Dimensional drawing |
|
| Width | 75 mm |
| Height | 118 mm |
| Depth | 54 mm |
| Bore dimensions | 60 mm x 103 mm |
| Color Housing | black |
| Flammability rating according to UL 94 | V0 |
| Material | Plastic |
| Securing | With locking clips for locking contour |
| Removal | Lifting and removal |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP54 |
| Degree of protection | IP54 |
| Ambient temperature (operation) | -30 °C ... 50 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Standards | |
| Standards/regulations | IEC 62196-3 |
| Mounting type Front mounting 0 to 45 degree frontal inclination possible | Front mounting 0 to 45 degree frontal inclination possible |
| Possible mounting positions | Front mounting |
| Restrictions to mounting position | Only 0 to 45 degree frontal inclination possible, see figure |
| Mounting hole diameter | 6.00 mm (ø) |