Test device - CHECKMASTER 2

CHECKMASTER 2 test device for testing the correct function of surge protective devices from Phoenix Contact.

This product needs further products for operation. Mandatory Accessories
Free Download available. Downloads

Product Details

Test adapters are not supplied as standard with the CHECKMASTER 2. The required test adapters must be ordered separately.

Product type Arrester test system
Insulation characteristics
Protection class I
Overvoltage category II
Pollution degree 2

Nominal frequency fN 50 Hz (60 Hz)
Nominal voltage UN 230 V AC
Nominal voltage UN 100 V AC ... 240 V AC

Power supply
Connection method Inlet connector for non-heating dev. - IEC 60320-1/C14

Connection method Type A

Width 432 mm
Height 170 mm
Depth 301 mm

Color black
Housing material ABS

Cable length 3 m
Cable/line name H05 VV-F

Mechanical data
Open side panel No

Ambient conditions
Degree of protection IP30 (in the ready-to-operate state)
Ambient temperature (operation) 5 °C ... 35 °C
Ambient temperature (storage/transport) -10 °C ... 60 °C
Altitude 2000 m
Permissible humidity (operation) 20 % ... 80 % (relative humidity)

Standards/specifications DIN EN 61010-1

Item number 2905256
Packing unit 1 pc
Minimum order quantity 1 pc
Note Made to Order (non-returnable)
Sales Key C10
Product Key CLB121
Catalog Page Page 221 (C-4-2019)
GTIN 4046356939560
Weight per Piece (including packing) 11.62 kg
Weight per Piece (excluding packing) 8.625 kg
Customs tariff number 90303370
Country of origin DE


ECLASS-9.0 27201114
ECLASS-10.0.1 27201114
ECLASS-11.0 27201114


ETIM 8.0 EC002495


UNSPSC 21.0 39121000

REACh SVHC Lead 7439-92-1
4-Nonylphenol, branched and linear

Your advantages

Fully automatic electrical testing of pluggable surge protective devices due to integrated PLC with high-voltage power supply unit
Easy replacement of test adapters due to tool-free interlocking
Electrical test with voltages of up to 2,000˽V˽DC possible - depending on the type of surge protective device
Convenient operation via LC touch screen and bar code scanner
Convenient read-out of test results and easy firmware updates via integrated USB interface
Robust plastic transport case with removable lid
Additional compartment for another test adapter
No additional software required
No data cable required
Easy transfer of test reports to Office programs
Easy system software update via USB stick
USB interface for connecting standard USB sticks
Barcode scanner for automatic identification of surge protective devices and for reading user-specific barcodes (e.g., plant identification codes)
Automatic and program-controlled testing of surge protective devices
Integrated programmable logic controller with high-voltage source and constant current source
Easy and tool-free changing of test adapters
Modular test device for virtually all plug-in surge arresters from Phoenix Contact
Easy operation by means of color touch display with virtual keypad