Infrastructure charging sockets with protective cover, for charging electric vehicles (EV) with alternating current (AC), compatible with Type 2 Infrastructure Plugs. For installation at charging stations for E-Mobility (EVSE)
EV-T2M3SO12-3P-P-SET
-
Infrastructure charging socket
1164422
CHARX connect modular, Infrastructure charging socket, square, Premium, Set, with square protective cover, with temperature sensors, with LED (common cathode connection), for charging electric vehicles (EV) with alternating current (AC), Type 2, IEC 62196-2, 32 A / 480 V (AC), without single-core wires, locking actuator: 12 V, 3-pos., Rear panel mounting, M5 thread, housing: black, PHOENIX CONTACT logo
Product details
Product type | Infrastructure charging socket |
Product family | CHARX connect modular |
Application | for charging electric vehicles (EV) with alternating current (AC) |
compatible with infrastructure charging plugs | |
Design (Infrastructure charging socket) | square |
Design (Protective cover) | square |
Design (Protective cap) | circular |
Type | Premium |
Set | |
Design | with square protective cover |
with temperature sensors | |
with LED (common cathode connection) | |
Affixed logo | PHOENIX CONTACT logo |
Charging standard | Type 2 |
Charging mode | Mode 3, Case B |
Data management status | |
Article revision | 08 |
Type of signal transmission | Pulse width modulation |
Note on the connection method | Connection via spade connector, separable and reconnectable |
Type of charging current | AC 3-phase |
Charging power rating | 22 kW |
Charging power | max. 26.6 kW |
Charging current | max. 32 A |
Power contact | |
Number | 5 (L1, L2, L3, N, PE) |
Rated voltage | 480 V AC |
Rated current | 32 A |
Signal contact | |
Number | 2 (CP, PP) |
Rated voltage | 30 V AC |
Rated current | 2 A |
LED function | |
Application | to display the charging status |
Position | in the frame of the protective cover |
Connection type | common cathode |
Temperature sensors (PTC chain) | |
Sensor type | PTC chain |
Standards/regulations | DIN EN 60738-1 |
Diagnostics | Short circuit, cable break |
Attachment point | Sensor for the AC contacts |
Measuring range_resistance | 800.00 Ω ... 300.00 kΩ |
Resistance | > 10 kΩ ((Shutdown value)) |
Recommended measured current | ≤ 1 mA (Umax= 24 V DC) |
Locking actuator | |
Operating voltage | 12 V |
Note number of positions | 3-pos. |
Position of the locking actuator | top center |
Locking actuator | |
Operating voltage | 12 V |
Note number of positions | 3-pos. |
Position of the locking actuator | top center |
Possible power supply range at the motor | 9 V ... 15.5 V |
Operating current | < 1.8 A |
Typical motor current for locking | 250 mA Average run current |
Reverse current of the motor | max. 2.4 A (Stall current) |
Max. dwell time with reverse current | 4 s |
Recommended triggering time | 200 ms ... 10 s (ton, typical) |
Pause time after entry or exit path | 8x (ton, typical) |
Service life insertion cycles | > 10000 load cycles |
Lock recognition | available |
Lock setting | LOCK (Lever in horizontal position) |
UNLOCK (Lever in vertical position) | |
Mechanical emergency release | available |
Ambient temperature (operation) | -30 °C ... 50 °C |
Cable length | 0.5 m |
Cable structure | 3 x 0.5 mm² |
Infrastructure charging socket | |
Dimensional drawing | |
Width | 75 mm |
Height | 91.71 mm |
Depth | 87.95 mm |
Protective cover | |
Dimensional drawing | |
Width | 84.9 mm |
Height | 93.7 mm |
Depth | 30.5 mm |
Bore dimensions | |
Dimensional drawing | |
Width | 60 mm |
Height | 60 mm |
Protective cap | |
Width | 64 mm |
Height | 57 mm |
Depth | 24 mm |
Color (Housing) | black (9005) |
Color (Protective cover) | black (9005) |
Material (Housing) | Plastic |
Material (Protective cover) | Plastic |
Material (Contact surface) | Silver |
Cable type | without single-core wires |
Single wire, cross section | 6.00 mm² |
Single-core wires for locking actuator | |
Cable length | 0.5 m |
Cable structure | 3 x 0.5 mm² |
Single wire, material | PVC |
External cable diameter | 1.60 mm ±0.20 mm |
Cable resistance | ≤ 37.1 Ω/m |
Single-core wires for PTC temperature sensors | |
Cable length | 0.5 m |
Cable structure | 5 x 0,5 mm² |
Single wire, material | PVC |
Single wire, color | BN/GY |
BN/YE/GN | |
External cable diameter | 1.60 mm ±0.20 mm |
Cable resistance | ≤ 37.1 Ω/m |
Type of cover movement | Self-locking |
Mechanical data | |
Insertion/withdrawal cycles | > 10000 |
Insertion force | < 100 N |
Withdrawal force | < 100 N |
Ambient conditions | |
Degree of protection (Infrastructure charging socket) | IP44 (plugged in) |
Degree of protection (Protective cover) | IP54 |
Ambient temperature (operation) | -30 °C ... 50 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | 5000 m (above sea level) |
Standards | |
Standards/regulations | IEC 62196-2 |
Mounting type Infrastructure charging socket | Rear panel mounting (0 to 90 degree frontal inclination possible) |
Mounting type Protective cover | Rear panel mounting |
Mounting hole diameter | 7.00 mm (ø) |
Fixing screws | M5 thread |
Screws included in the scope of delivery | none |
Item number | 1164422 |
Packing unit | 1 pc |
Minimum order quantity | 1 pc |
Sales key | XWB |
Product key | XWBADC |
GTIN | 4063151177799 |
Weight per piece (including packing) | 616 g |
Weight per piece (excluding packing) | 614 g |
Customs tariff number | 85366990 |
Country of origin | DE |
ECLASS
ECLASS-11.0 | 27144706 |
ECLASS-12.0 | 27144706 |
ECLASS-13.0 | 27144706 |
ETIM
ETIM 9.0 | EC002898 |
UNSPSC
UNSPSC 21.0 | 39121800 |
EU RoHS | |
Fulfills EU RoHS substance requirements | Yes |
Exemption | 6(c), 7(c)-I |
China RoHS | |
Environment friendly use period (EFUP) |
EFUP-10
An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
|
EU REACH SVHC | |
REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
SCIP | 89139661-16de-4736-ab15-ad4ecd90d050 |
Compatible products
-
EV-LABEL-C-SO - Label 1315521
-
EV-T2SOC-P - Protective cover 1164297
-
EV-T2M3SOW-1AC32A-0,3M6,0E - Cable set for infrastructure charging socket 1164343
-
EV-T2M3SOW-3AC20A-0,3M2,5E - Cable set for infrastructure charging socket 1164355
-
EV-T2M3SOW-3AC32A-0,3M6,0E - Cable set for infrastructure charging socket 1164362
-
EV-T2M3SOW-1AC32A-0,7M6,0E - Cable set for infrastructure charging socket 1164344
-
EV-T2M3SOW-3AC20A-0,7M2,5E - Cable set for infrastructure charging socket 1164361
-
EV-T2M3SOW-3AC32A-0,7M6,0E - Cable set for infrastructure charging socket 1164365
-
EV-T2M3SL12-CONNECTOR - Connector 1132718
-
EV-T2M3SO-CAP - Protective cap 1202424
-
EV-T2M3SO-CAP-REMOVER - Removal tool 1286836
-
CHARX SEC-1000 - AC charging controller 1139034
-
CHARX SEC-3000 - AC charging controller 1139022
-
CHARX SEC-3050 - AC charging controller 1139018
-
CHARX SEC-3100 - AC charging controller 1139012
-
CHARX SEC-3150 - AC charging controller 1138965
-
EM-CP-PP-ETH - AC charging controller 2902802
-
VAL-EV-T1/T2 264/12.5/3+1 - Lightning/surge arrester type 1/2 1180149
-
VAL-EV-T1/T2 264/12.5/3+1-R - Lightning/surge arrester type 1/2 1180150
-
VAL-EV-T2 280/3+1 - Type 2 surge arrester 1180144
-
VAL-EV-T2 280/3+1-R - Type 2 surge arrester 1180145
Your advantages
Charging status intuitively visible at a glance with color LED indicator
Protected against overheating with precise temperature measurement
Flexible mounting and easy maintenance with plug-in cables
Available with your logo on request - for consistent branding of your charging station
Waterproof and dirtproof due to fully molded contacts
Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
Uniform, space-saving installation space
PHOENIX CONTACT s.r.o.
Námestie Mateja Korvína 1, 811 07 Bratislava. Zapísaná v Obchodnom registri Okresného súdu Bratislava III, vložka číslo 48994/B.