Charging sockets for electric cars and utility vehicles

The CHARX connect universal vehicle charging inlets enable the AC and DC charging of all types of electric vehicles. Along with type 1 and type 2 AC and CCS (Combined Charging System) charging inlets, GB/T versions are also available for China. The vehicle charging inlets are already being used successfully in electric cars from well-known manufacturers and in all kinds of utility vehicles. They allow electric vehicles to be charged continuously with a charging power of 250 kW, and even up to 500 kW in Boost Mode.

Show Advanced Filtering

Filter:

Product type
Product family
Charging standard
Type of charging current
Charging current
Charging power
Cable length
Locking actuator present

Go to Product Detail Page for item 1211222

CHARX T2HBI12-DC250-2,0M2 - Vehicle charging inlet

CHARX T2HBI12-DC250-2,0M2 - Vehicle charging inlet

1211222

CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 250 A / 1000 V (DC), Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.

Go to Product Detail Page for item 1271966

CHARX T2HCI12-3AC32-2,0M2 - Vehicle charging inlet

CHARX T2HCI12-3AC32-2,0M2 - Vehicle charging inlet

1271966

CHARX connect universal, Vehicle charging inlet, for charging electric vehicles (EV) with alternating current (AC), AC type 2, IEC 62196-2, 32 A / 480 V (AC), Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the AC contacts.

Go to Product Detail Page for item 1211210

CHARX T2HBI24-3AC32DC125-2,0M2 - Vehicle charging inlet

CHARX T2HBI24-3AC32DC125-2,0M2 - Vehicle charging inlet

1211210

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 125 A / 1000 V (DC), 32 A / 480 V (AC), Single wires, length: 2 m, locking actuator: 24 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

Go to Product Detail Page for item 1349577

CHARX T2HBI12-DC250-5,0M2 - Vehicle charging inlet

CHARX T2HBI12-DC250-5,0M2 - Vehicle charging inlet

1349577

CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 250 A / 1000 V (DC), Single wires, length: 5 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.

Go to Product Detail Page for item 1300848

CHARX T2HBI12-3AC32DC200-3,0M6 - Vehicle charging inlet

CHARX T2HBI12-3AC32DC200-3,0M6 - Vehicle charging inlet

1300848

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), Single wires, length: 3 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

Go to Product Detail Page for item 1270297

CHARX T2HBI12-1AC32DC125-2,0M2 - Vehicle charging inlet

CHARX T2HBI12-1AC32DC125-2,0M2 - Vehicle charging inlet

1270297

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 125 A / 1000 V (DC), 32 A / 250 V (AC), Single wires, length: 2 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

Go to Product Detail Page for item 1211206

CHARX T2HBI24-1AC32DC250-2,0M2 - Vehicle charging inlet

CHARX T2HBI24-1AC32DC250-2,0M2 - Vehicle charging inlet

1211206

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 250 A / 1000 V (DC), 32 A / 250 V (AC), Single wires, length: 2 m, locking actuator: 24 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

Go to Product Detail Page for item 1451907

CHARX T1HBI12-1AC80DC200-9,0M1 - Vehicle charging inlet

CHARX T1HBI12-1AC80DC200-9,0M1 - Vehicle charging inlet

1451907

CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 1, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), 80 A / 250 V (AC), Single wires, length: 9 m, locking actuator: 12 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC and AC contacts.

Go to Product Detail Page for item 1303648

CHARX T2HBI24-DC250-4,0M2 - Vehicle charging inlet

CHARX T2HBI24-DC250-4,0M2 - Vehicle charging inlet

1303648

CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), CCS type 2, IEC 62196-2, IEC 62196-3, 250 A / 1000 V (DC), Single wires, length: 4 m, locking actuator: 24 V, 4-pos., Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.

Go to Product Detail Page for item 1271834

CHARX GBH4I-DC125-2,0M - Vehicle charging inlet

CHARX GBH4I-DC125-2,0M - Vehicle charging inlet

1271834

CHARX connect universal, Vehicle charging inlet, for charging with direct current (DC), DC GB/T, GB/T 20234.3-2015, 125 A / 1000 V (DC), Single wires, length: 2 m, Front and rear mounting, M6, housing: black, A protective cap is supplied as standard for the DC contacts.

Your advantages

Ultra-fast HPC charging with a temporary power rating of up to 500 kW with conductor cross-sections of up to 95 mm²
Protected against overheating with fast and precise temperature measurement at every DC power contact and the AC contacts
Protected and sealed against dirt and water with comprehensive IP6K7 and IP6K5 degree of protection, plus IP6K6K and IP6K9K on the front
Easy design-in with the AC and CCS charging inlets having identical dimensions and screw-on points
Developed in accordance with the automotive standard and conforming to IEC 62196, SAE J1772, and GB/T 20234; IATF 16949-certified company

HPC-capable CCS charging sockets for all vehicle types Discover our universal inlets

Electric car being charged via CCS charging inlet with the progress displayed on a smartphone

PT1000 sensors at both DC power contacts

Various types of electric vehicles – from forklift trucks to dump trucks

Electric street cleaning vehicle with close up of CCS charging inlets design-in

Secure interlock of an HPC charging plug in the vehicle charging inlet during the charging process

CCS charging inlets – charging in the shortest amount of time

The CCS charging inlets with DC conductor cross-sections of up to 95 mm² now enable safe HPC charging with up to 500 kW. Depending on external factors, such as the ambient temperature, it is therefore now possible to charge electric vehicles in just a few minutes.
Vehicles can be charged continuously with a charging power of 250 kW, and up to 500 kW in Boost Mode.

Temperature sensors

The optimized connection technology minimizes heating of the connection system. The integrated, highly accurate temperature sensors ensure a high level of safety, as the vehicle can dynamically regulate the required charging current based on the temperature evaluation. PT1000 sensors are located at both DC power contacts. The AC range includes a PTC sensor system.

One charging inlet for all vehicles

New generations of electric cars in particular must be able to be charged in a short amount of time with maximum safety. The same applies to electric utility vehicles such as buses, transporters, forklift trucks, tractors, construction machines, mining vehicles, cleaning and disposal vehicles, emergency vehicles, and tow trucks.

Our vehicle charging inlets are the universal charging interface for all vehicle types. They are the vehicle-side counterpart to the AC or DC charging connector. Equipped with a CCS charging inlet, a vehicle can be charged with both direct current (DC) and alternating current (AC).

Easy design-in

All vehicle charging inlets have an extremely compact design. In addition, the relevant external dimensions and screw-connection geometries of the CCS charging inlets and AC charging inlets are identical to each other.

This allows manufacturers and retrofitters to plan the same installation space for each electric vehicle regardless of the target market – from buses to motorcycles.

Secure interlock during charging

All vehicle charging inlets, with the exception of the GB/T DC charging inlet, are equipped with an electromagnetic locking actuator in accordance with standards. It locks the vehicle charging connector on the side of or directly onto the locking clip in the mating face during the charging process.

The actuator bolt is designed to withstand high pull-out forces. This makes it impossible to pull out the charging connector during the charging process.

Universal use – our CCS charging inlet

Video: Universal vehicle charging inlets

Technical features of the vehicle charging inlets

Find out about all the advantages

Find out more about our vehicle charging inlets, the advantages, and the technical features. You can also learn more about our satisfied customers and about the vehicles in which the charging inlets are already being used successfully.

Find out more