CMS-GTG 1,5
- Engraving tool
CMS-GTG 1,5
- Engraving tool
5061882
Fully hard metal chisel, 1 cutting edge, cutting width: 1.5 mm
Plotter and engraver
Our plotter marks high-quality marking materials to create durable markings. Simply switching the standard plotter head with the engraving unit converts the plotter into an engraving system. Markings created with this system are very durable even under extreme conditions.
CMS-P1-WMU-ADAPTER
- Magazine insert
CMS-P1-WMU-ADAPTER
- Magazine insert
5144822
Adapter plate for WMU magazines, for using the universal frame CMS-WMU with the magazine inserts of the CMS-MCP 3 plotter
P1 ENGRAVING CONTROLLER
- Accessories
P1 ENGRAVING CONTROLLER
- Accessories
5145698
Control unit for ENGRAVING UNIT and P1 ENGRAVING UNIT engraving systems
CMS-GTM 0,4
- Fully hard metal milling cutter
CMS-GTM 0,4
- Fully hard metal milling cutter
5066748
Fully hard metal milling cutter, 2 cutting edges, milling width: 0.4 mm
P1 ENGRAVING CC1
- Accessories
P1 ENGRAVING CC1
- Accessories
5145591
Replacement connection cable between extraction unit and control unit
CMS-P1-M/WIEL
- Magazine insert
CMS-P1-M/WIEL
- Magazine insert
5144929
Plastic magazine for CMS-P1 plotter. To accept 3 Wieland sheets, type 50, 51, 60, 63, 67, 68, 69 or 80
CMS-VAC-W5
- Vacuum unit
CMS-VAC-W5
- Vacuum unit
5066612
Vacuum unit, suction capacity: 7.4 m3/h, motor capacity: 0.37 kW, operating voltage: 230 V AC, 50 Hz
CMS-P1-M/WAGO WSB 4
- Magazine insert
CMS-P1-M/WAGO WSB 4
- Magazine insert
5144877
Plastic magazine for CMS-P1 plotter. Accepts 2 WAGO WSB 4 mats.
P1 ENGRAVING VC PLUG
- Accessories
P1 ENGRAVING VC PLUG
- Accessories
5145630
Replacement adapter as connection between suction tube and engraving spindle
CMS-PEN 0,50
- Marker pen
CMS-PEN 0,50
- Marker pen
5067831
Marker pen, incl. adapter, ink tank and reservoir, 0.5 mm nib
Your advantages
- Easy operation of the plotter with the PROJECT complete marking software
- Fast startup with a USB and Centronics interface
- User-friendly: clear operation with just four keys
The plotter with engraving unit
The plotter with engraving unit is the ideal marking system for use in workshops.
You can use the system to engrave metals and special double-layer plastics. Engraving chisels are available with diameters ranging from 0.2 to 1.0 mm for creating different line thicknesses.
Engraved labels can be used, for example, to mark cables that are laid in the ground.
Create durable markings for aggressive environments.